[transmission] Transmission 1.76 + DHT download and discussion (OLD THREAD)

[transmission] Transmission 1.76 + DHT download and discussion (OLD THREAD) - Printable Version

+- Networked Media Tank (http://www.networkedmediatank.com)
+-- Forum: NMT Software & Settings (/forumdisplay.php?fid=19)
+--- Forum: Torrent and Usenet (/forumdisplay.php?fid=64)
+--- Thread: [transmission] Transmission 1.76 + DHT download and discussion (OLD THREAD) (/showthread.php?tid=10662)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109

RE: [transmission] Transmission 1.75 + DHT download and discussion - nme - 10-09-2009 05:22 PM

Have anyone else noticed that the ratio-function is f***ed up?
It was ok on 1.73 but since 1.74 it is not working. Transmission-daemon shows wrong figures.

RE: [transmission] Transmission 1.75 + DHT download and discussion - BVromans - 10-10-2009 02:16 PM

(10-09-2009 05:22 PM)nme Wrote: Have anyone else noticed that the ratio-function is f***ed up?
It was ok on 1.73 but since 1.74 it is not working. Transmission-daemon shows wrong figures.

My ratio support is down as well. Ratio limit in settings.json is correct, but does not work. I use Transmission Remote Gui which has ratio settings itself. Tried to toggle these to on and off, no effect. Also with web GUI no result.

RE: [transmission] Transmission 1.75 + DHT download and discussion - alest - 10-11-2009 02:55 PM

How to open nmt port to get incoming connections for higher seeding rates, please?

RE: [transmission] Transmission 1.75 + DHT download and discussion - Ger Teunis - 10-11-2009 05:08 PM

(10-11-2009 02:55 PM)alest Wrote: How to open nmt port to get incoming connections for higher seeding rates, please?

You will need to open ports on your router, not you NMT.
More information how you need to open port on your router is here:
http://www.portforward.com/
Open tcp port 51413 towards your NMT.

RE: [transmission] Transmission 1.75 + DHT download and discussion - alest - 10-11-2009 05:23 PM

(10-11-2009 05:08 PM)Ger Teunis Wrote: You will need to open ports on your router, not you NMT.
More information how you need to open port on your router is here:
http://www.portforward.com/
Open tcp port 51413 towards your NMT.

It is opened in my router. Strange thing is that "Test port" function sometimes reports CLOSED, another time - it says OPEN.

Thanks for the answer.

RE: [transmission] Transmission 1.75 + DHT download and discussion - nme - 10-11-2009 10:25 PM

(10-10-2009 02:16 PM)BVromans Wrote: My ratio support is down as well. Ratio limit in settings.json is correct, but does not work. I use Transmission Remote Gui which has ratio settings itself. Tried to toggle these to on and off, no effect. Also with web GUI no result.

Same problem that i have. When checking via the CLI "transmission-remote -l" the seed-ratio column is has non correct values.
If I stop transmission and check settings.json the ratio-limit settings is corrupt:
"ratio-limit": -214748.3648,
"ratio-limit-enabled": true,

I´m running transmission 1.75 on my NAS whitout these problems. I think there has been some faults when compiling the version for popcorn.

RE: [transmission] Transmission 1.75 + DHT download and discussion - strakarpickup - 10-11-2009 11:06 PM

(10-11-2009 05:23 PM)alest Wrote: It is opened in my router. Strange thing is that "Test port" function sometimes reports CLOSED, another time - it says OPEN.

Thanks for the answer.

Hi!
This is my first post, so just to say, great forum! I've learned a lot from here already.

I'm in trouble also to make the upload work.

I've also tryied to change the port in the nmt but still doesn't work.

I've tryied to do the mapping with TCP only and also with both TCP and UDP mapped.

It's not a problem of my router, because the other NAT mapping port my pc works.

Can someone help please?

Thanks

RE: [transmission] Transmission 1.75 + DHT download and discussion - emcue - 10-13-2009 11:48 AM

guys, when I start Transmission, when I am downloading a torrent, after a few minutes, I can't access the WEBUI, I have to turn off and on the PCH unit, or restart transmission using CSI, but the file was still downloading even if the WEB UI won't start. is this a case of too many connections? I modified the .settings file to connect to 200 seeds.

Also is it normal that I can't access the transmission page using my NMT? Thanks!!

RE: [transmission] Transmission 1.75 + DHT download and discussion - generals - 10-13-2009 03:58 PM

(10-13-2009 11:48 AM)emcue Wrote: guys, when I start Transmission, when I am downloading a torrent, after a few minutes, I can't access the WEBUI, I have to turn off and on the PCH unit, or restart transmission using CSI, but the file was still downloading even if the WEB UI won't start. is this a case of too many connections? I modified the .settings file to connect to 200 seeds.

Also is it normal that I can't access the transmission page using my NMT? Thanks!!

Which Trasmission version?

RE: [transmission] Transmission 1.75 + DHT download and discussion - Ger Teunis - 10-13-2009 04:03 PM

(10-13-2009 11:48 AM)emcue Wrote: guys, when I start Transmission, when I am downloading a torrent, after a few minutes, I can't access the WEBUI, I have to turn off and on the PCH unit, or restart transmission using CSI, but the file was still downloading even if the WEB UI won't start. is this a case of too many connections? I modified the .settings file to connect to 200 seeds.

Also is it normal that I can't access the transmission page using my NMT? Thanks!!

Could be the connections indeed, I've limited the number of connections in the default installation to give the users a stable experience out of the box.

The NMT seems to have stability problems when downloading torrents with high peer count. (my personal experience). On my 'private' tracker (low peer count, maxing out connection speed) I do not seem to have stability issues.

RE: [transmission] Transmission 1.75 + DHT download and discussion - wasssu - 10-13-2009 04:58 PM

(10-13-2009 11:48 AM)emcue Wrote: guys, when I start Transmission, when I am downloading a torrent, after a few minutes, I can't access the WEBUI, I have to turn off and on the PCH unit, or restart transmission using CSI, but the file was still downloading even if the WEB UI won't start. is this a case of too many connections? I modified the .settings file to connect to 200 seeds.

Also is it normal that I can't access the transmission page using my NMT? Thanks!!

Same problem here. 1.73 was ok but the last version is fkd up. Also the download speed is not constant.

RE: [transmission] Transmission 1.75 + DHT download and discussion - lundman - 10-15-2009 11:42 AM

I think Ger is having a sleep-in, can someone test if my build of transmission for C200 has the some core problems?

http://lundman.net/ftp/nmt/transmissioncli
http://lundman.net/ftp/nmt/transmission-daemon

RE: [transmission] Transmission 1.75 + DHT download and discussion - Ger Teunis - 10-15-2009 05:13 PM

(10-15-2009 11:42 AM)lundman Wrote: I think Ger is having a sleep-in, can someone test if my build of transmission for C200 has the some core problems?

http://lundman.net/ftp/nmt/transmissioncli
http://lundman.net/ftp/nmt/transmission-daemon

Haha, no I had to go to some seminar. Was not able to check any mail and sites the whole day Smile

Thanks for your work lundman, now I would really would like to know what I did wrong now Sad

RE: [transmission] Transmission 1.75 + DHT download and discussion - lundman - 10-15-2009 11:24 PM

Well, it'd be better if you could test it with your test case, maybe it was fluke that it worked for me.

I will write a long-complete history of what I did, so we can compare notes.

RE: [transmission] Transmission 1.75 + DHT download and discussion - lundman - 10-16-2009 01:21 AM

http://lundman.net/wiki/index.php/C200:Transmission