+- Networked Media Tank (http://www.networkedmediatank.com)
+-- Forum: NMT Software & Settings (/forumdisplay.php?fid=19)
+--- Forum: Torrent and Usenet (/forumdisplay.php?fid=64)
+--- Thread: NZBGET not connecting (/showthread.php?tid=31560)
NZBGET not connecting - dzapffe19 - 11-19-2009 01:04 AM
I can get to the C-200 NZBget web interface on port 8066.
Under NMT applications, Usenet client is stuck on "starting"
I am getting an error in the web interface:
ERROR: NZBGetWeb could not connect to NZBGet-Server.
Possible reasons include:
# NZBGet-Server is not running (start);
# IP/Port-settings are incorrect. Check config;
# Firewall is not properly configured (if nzbget-server and web-interface run on different computer).
Error-message reported by OS: Connection refused (146)
Whats the deal?
RE: NZBGET not connecting - Atinkler - 11-19-2009 02:55 PM
On the A110 you press START wait a little bit and then click refresh
RE: NZBGET not connecting - FroZzi - 11-20-2009 01:43 PM
(11-19-2009 01:04 AM)dzapffe19 Wrote: I can get to the C-200 NZBget web interface on port 8066.
Under NMT applications, Usenet client is stuck on "starting"
I am getting an error in the web interface:
ERROR: NZBGetWeb could not connect to NZBGet-Server.
Possible reasons include:
# NZBGet-Server is not running (start);
# IP/Port-settings are incorrect. Check config;
# Firewall is not properly configured (if nzbget-server and web-interface run on different computer).
Error-message reported by OS: Connection refused (146)
Whats the deal?
I've had the same problem, but have you set the right serverIP etc. from the nzbgetconf-file?
RE: NZBGET not connecting - michaelg04 - 12-22-2009 08:18 PM
i am having this exact issue now, i just got a much larger drive, this is the first thing i setup and it's simply not working, usenet client stuck on starting with the same error code above. i have no idea whats going on
RE: NZBGET not connecting - vierhoog - 12-23-2009 09:16 PM
I had the same issue on my C200. I changed the username and servername for the payserver that I use and after that it was stuck in starting.
Resolved it by emptying the nzb folder and queue. Started straight away again.
Then loaded new NZB and it workes lika a charm.
RE: NZBGET not connecting - chris57 - 12-25-2009 10:54 AM
I find usually the quickest way to sort out any apps that are stuck on 'starting' is to reinstall the NMT Apps, making sure you select typical so you don't erase your files.
RE: NZBGET not connecting - michaelg04 - 12-27-2009 08:06 PM
well done that, several times. simply i have to stop/start it manually anytime the popcorn hour is rebooted, it was also the first app installed on a fresh HDD
RE: NZBGET not connecting - Slevin - 01-02-2010 06:00 PM
i get this too,
the thing i do is restart NZBget with CSI
RE: NZBGET not connecting - Slevin - 01-05-2010 10:02 AM
Hmm, i think it might have to do anything with the ServerIp in config.
Mine is set to localhost (127.0.0.1).. should this be the ip given by my router?
however this is still internal (192.168.1.6x) ?
any ideas from anyone?
RE: NZBGET not connecting - siemed - 01-07-2010 10:08 PM
(01-05-2010 10:02 AM)Slevin Wrote: Hmm, i think it might have to do anything with the ServerIp in config.
Mine is set to localhost (127.0.0.1).. should this be the ip given by my router?
however this is still internal (192.168.1.6x) ?
any ideas from anyone?
Same problem here. When I changed the config file, becuase I have a different usenet provider, it does not work anymore. After this I removed the .nzbget directory and installed a newer version. Even with the config file it came with I have the connection refused error.
Does anyone have a solution?
RE: NZBGET not connecting - geebachu - 01-28-2010 04:23 PM
Hi,
I am having the exact same problem as the original poster. Have tried everything that has been suggested so far.
Thanks for any help you can offer!
RE: NZBGET not connecting - fernandose - 02-01-2010 06:13 PM
(01-07-2010 10:08 PM)siemed Wrote: Same problem here. When I changed the config file, becuase I have a different usenet provider, it does not work anymore. After this I removed the .nzbget directory and installed a newer version. Even with the config file it came with I have the connection refused error.
Does anyone have a solution?
I have the same problem, whereby I changed the config file to update new usenet server details and I now get that error
I haven't reinstalled the same version or installed a new version. I've got A-110
Any advice?
RE: NZBGET not connecting - etienne_jb - 04-30-2010 03:09 PM
Same problem here. Since some time I get the error 146, connection refused.
Tried all the tips I could read in the forum like
-I have deleted all the nzbget directories
-did a new install with the nmt installer
-changed ip in config to 0.0.0.0
restarted everytime
But still no luck. all I get is the NZBget screen saying
==
ERROR: NZBGetWeb could not connect to NZBGet-Server.
Possible reasons include:
NZBGet-Server is not running (start);
IP/Port-settings are incorrect. Check config;
Firewall is not properly configured (if nzbget-server and web-interface run on different computer).
Error-message reported by OS: Connection refused (146)
==
It is driving me mad since nzbget is my most used application.
What is weird is that I read somewhere to check the nzbget.log. Where is that log file? I haven't found in antwhere on my A-110.