+- Networked Media Tank (http://www.networkedmediatank.com)
+-- Forum: Community Jukebox, Themes, & UserApps Section (/forumdisplay.php?fid=106)
+--- Forum: 200/300/400 Series - Development and User Apps (/forumdisplay.php?fid=121)
+---- Forum: 100 Series - Development and User Apps (/forumdisplay.php?fid=33)
+---- Thread: NMT remote iPhone native app. (/showthread.php?tid=37439)
RE: NMT remote iPhone native app. - temm - 03-25-2010 11:42 AM
(03-25-2010 07:52 AM)pman860507 Wrote: I have an egreat m34a I wnt to the wiki page and downloaded all the files though it said I need to make to file excuteable (This I'm not sure what to do). When I click install to USB drive (not safe to pull it out) I just get a white screen with nothing on it. When I click install throught internal memory (safe to pull out) I get a program found error.
Then I am also kinda lost on setting this up through the iPhone. How do I know what the source path is? Is it networked since I'm streaming though my server. With the myihome application. Also will it matter that I have multiple streamers that my tank picks up?
anyways thanks in advace for the help I'm excited to use this app
Hi,
The easiest way to make the file executable is with an ftp program. Connect the usb to your pc/mac and with the ftp program go to the attributes of the file. Enable executable
When you run the installer from the pch e.g /tmp the screen should show you
Program found...
For the setup up path just leave it blank or /. It will go to the root of the share. Since i have other stuff in my share that aren't pch related i use /media so i dont have to drill down one directory every time.
Hope it helped
Teo
RE: NMT remote iPhone native app. - tjobing - 03-25-2010 01:41 PM
Hi Teo, and thanks for a great app.
I just wondered, do you have any plans for putting an "Enter/OK" button on the remote? I have tried to read the whole tread and I'm sorry if you already answered this question.
I'm not very technical, so I have some difficulties getting the app to work the same way as in the demo video, but I propably will find out why later.
Thanks again
Kristian
RE: NMT remote iPhone native app. - pman860507 - 03-25-2010 07:23 PM
(03-25-2010 11:42 AM)temm Wrote: Hi,
The easiest way to make the file executable is with an ftp program. Connect the usb to your pc/mac and with the ftp program go to the attributes of the file. Enable executable
When you run the installer from the pch e.g /tmp the screen should show you
Program found...
For the setup up path just leave it blank or /. It will go to the root of the share. Since i have other stuff in my share that aren't pch related i use /media so i dont have to drill down one directory every time.
Hope it helped
Teo
Thanks that was great help I was able to make the file excuteable. But when I run it from internal memory I still get this message.
Found program...
cp: read error: input/outup error Sorry, it appears that cp returned an error.
And when I click run from USB still just a white screen. And I can not connect the app
RE: NMT remote iPhone native app. - temm - 03-25-2010 09:56 PM
(03-25-2010 01:41 PM)tjobing Wrote: Hi Teo, and thanks for a great app.
I just wondered, do you have any plans for putting an "Enter/OK" button on the remote? I have tried to read the whole tread and I'm sorry if you already answered this question.
I'm not very technical, so I have some difficulties getting the app to work the same way as in the demo video, but I propably will find out why later.
Thanks again
Kristian
Yes, the ENTER button along with a couple of features and bug fixes will be coming out in a couple of days.
Teo
RE: NMT remote iPhone native app. - xploid - 03-25-2010 10:08 PM
Hi Teo!
Any news on the 200 Series compatibility?
RE: NMT remote iPhone native app. - temm - 03-26-2010 06:26 AM
(03-25-2010 10:08 PM)xploid Wrote: Hi Teo!
Any news on the 200 Series compatibility?
Well i received my a200 did some testing and extra work needs to be done. But i am still working on some issues with the current version.
Hopefully i'll post the new update today.
I'm having problems with the a200 during network playback and i see there are alot of problems concerning network/router/switches.
Anyway i'll get on to it when this update is finished.
Teo
RE: NMT remote iPhone native app. - dagovima - 03-27-2010 01:00 PM
Looks really a great application, I was excited about it but......
Should'n you advice in the apple store the need of anothers application in the nmt to make your application feasible?
The text showed in the lundman's page might scare people when you read about the telnetd installing.
"It is entirely possible that you can break your hardware, for which I can not be held responsible, nor is it likely you will get help from Syabas. This guide should not be read by anyone "
I'm waiting for an iphone, maybe 4G and have already installed telnet time ago in my PCH A100, might get the application when the iphone arrives.
Suggestion, could you make your applicattion independent, making itself the install of the telnetd into de PCH from the iphone? Maybe my suggestion is too silly, but this will make the your application really friendly for people without too much Knowledge installing telnet into PCH from PC (or MAC).
Regards and congratulations.
RE: NMT remote iPhone native app. - temm - 03-27-2010 06:08 PM
(03-27-2010 01:00 PM)dagovima Wrote: Looks really a great application, I was excited about it but......
Should'n you advice in the apple store the need of anothers application in the nmt to make your application feasible?
The text showed in the lundman's page might scare people when you read about the telnetd installing.
"It is entirely possible that you can break your hardware, for which I can not be held responsible, nor is it likely you will get help from Syabas. This guide should not be read by anyone "
I'm waiting for an iphone, maybe 4G and have already installed telnet time ago in my PCH A100, might get the application when the iphone arrives.
Suggestion, could you make your applicattion independent, making itself the install of the telnetd into de PCH from the iphone? Maybe my suggestion is too silly, but this will make the your application really friendly for people without too much Knowledge installing telnet into PCH from PC (or MAC).
Regards and congratulations.
Hi
Well there is a special notice indicating that free software is required to be installed.
Unfortunately telnet is not enabled be default for various reasons. I was troubled how to do this. Redirect everyone lundman's wiki or create a new wiki page. I decided to go with the first.
Surely the "Install this at your own risk... " etc., will scare the novice but i couldn't omit it.
Your suggestion would best for the app also. I have thought about and if it is feasible maybe it could be done the other way around, from the pch to the pc/mac.
I will look into this but first i have work with the A-200.
Teo
Just uploaded version 1.5.12 to the app store, should be available soon.
This version has the following:
- Added Enter button for Remote
- Added Parameter for Disable sleep mode
- Added Support for .iso Playback
- Complete directory playback from selected file
- Added Support for Large directories
- Bug fix for special character '
There are a couple of things that i still want to include for network_browsing and shares. These will be in the next update.
Teo
RE: NMT remote iPhone native app. - dagovima - 03-27-2010 10:40 PM
Thanks for your replay and SUPPORT.
Talk to you soon, once I have the iphone.
David
RE: NMT remote iPhone native app. - pman860507 - 03-28-2010 12:00 AM
I have been at it for 4 days now and I still can't get it to connect
RE: NMT remote iPhone native app. - rocky98 - 03-28-2010 09:25 AM
Hi,
someone sucessfully tested on a HDX 1000?
When i manually connect to the HDX i can't see the networkshares.
When i restart the app i'll got the error "unknown device".
I think the app checks the NMT name.
So it is possilbe to add the HDX 1000 to the device list?
greetz
Rocky98
RE: NMT remote iPhone native app. - temm - 03-28-2010 10:03 AM
(03-28-2010 12:00 AM)pman860507 Wrote: I have been at it for 4 days now and I still can't get it to connect
Have you successfully installed telnet? Can you telnet from your pc to the pch?
Teo
(03-28-2010 09:25 AM)rocky98 Wrote: Hi,
someone sucessfully tested on a HDX 1000?
When i manually connect to the HDX i can't see the networkshares.
When i restart the app i'll got the error "unknown device".
I think the app checks the NMT name.
So it is possilbe to add the HDX 1000 to the device list?
greetz
Rocky98
Yes it does check the NMT name since there are differences between the PCH 100 series and the egreat. I don't have an HDX1000 to test it.
If you could provide me with some directory listings from the output of a telnet i could include it.
Teo
RE: NMT remote iPhone native app. - rocky98 - 03-28-2010 10:20 AM
(03-28-2010 10:03 AM)temm Wrote: Have you successfully installed telnet? Can you telnet from your pc to the pch?
Teo
(03-28-2010 09:25 AM)rocky98 Wrote: Hi,
someone sucessfully tested on a HDX 1000?
When i manually connect to the HDX i can't see the networkshares.
When i restart the app i'll got the error "unknown device".
I think the app checks the NMT name.
So it is possilbe to add the HDX 1000 to the device list?
greetz
Rocky98
Yes it does check the NMT name since there are differences between the PCH 100 series and the egreat. I don't have an HDX1000 to test it.
If you could provide me with some directory listings from the output of a telnet i could include it.
Teo
Hi Teo,
anything special, or just the "ls -l"?
any special directories?
Rocky98
RE: NMT remote iPhone native app. - temm - 03-28-2010 10:42 AM
(03-28-2010 10:20 AM)rocky98 Wrote: Yes it does check the NMT name since there are differences between the PCH 100 series and the egreat. I don't have an HDX1000 to test it.
If you could provide me with some directory listings from the output of a telnet i could include it.
Teo
Hi Teo,
anything special, or just the "ls -l"?
any special directories?
Rocky98
[/quote]
Hi,
Nothing special, as you said ls -l from some directory with media files
Also confirm and give me listing from
/opt/sybhttpd/localhost.drives/
And one last thing, do a
cat /etc/config
Thanks
Teo
RE: NMT remote iPhone native app. - rocky98 - 03-28-2010 11:17 AM
(03-28-2010 10:42 AM)temm Wrote: Hi Teo,
anything special, or just the "ls -l"?
any special directories?
Rocky98
Hi,
Nothing special, as you said ls -l from some directory with media files
Also confirm and give me listing from
/opt/sybhttpd/localhost.drives/
And one last thing, do a
cat /etc/config
Thanks
Teo
[/quote]
You have a PM