+- Networked Media Tank (http://www.networkedmediatank.com)
+-- Forum: General (/forumdisplay.php?fid=10)
+--- Forum: Firmware Releases (/forumdisplay.php?fid=11)
+---- Forum: Archive for Old Releases (Read Only) (/forumdisplay.php?fid=111)
+---- Thread: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) (/showthread.php?tid=40145)
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - djpollum - 05-10-2010 09:18 PM
(05-10-2010 08:44 PM)Adrgha Wrote:(05-10-2010 08:01 PM)Adrgha Wrote: I have to say it appears that way. I have tried 20 different combinations of the hdparm line I used before and it just won't work. I was so happy when I managed to fix this a while back because the spindown timer of 10 minutes is so incredibly annoying.
Ok, it seems like I have found a solution. I deleted the start_app.sh file and reinstalled lundman shell to rebuild it. I then added the /sbin/hdparm -S0 /dev/sda line and it seems to work again. So to anyone who has problems with getting settings in the start_app.sh file to work, try rebuilding it.
I followed your instructions. Deleted the start_app.sh file and reinstalled lundman shell. Got a new start_app.sh file created. Edited this file with Notepad++ (as suggested in http://www.networkedmediatank.com/showthread.php?tid=40209&pid=377287#pid377287) so the file format stays the same.
Unfortunately all this still didn't help...
Any more suggestions?
EDIT: Also all the settings of my NMT apps and my settings for NZBGET are also gone each time my PCH is being reset. This wasn't the case earlier, when everything worked fine...
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - reingraat - 05-10-2010 10:07 PM
(05-10-2010 07:04 PM)walkerx Wrote: i've used all previous firmwares without any issues, it's only this one that has caused my c-200. I've received rma to send it back, but it gonna cost me at least £20
Same here,
I also have to send it back.
It is going to cost almost € 30, and I think i am going to be about three or four weeks without the PCH....
I also think it is something with this last update. I am sure I don nothing wrong. Also no CRC fault, so the package was okay,.
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - lou - 05-10-2010 10:11 PM
Just for the record I did the new firmware update and now my MKV blueray files stutter slow paging. Never had any issues with MKV until now watched all of these movies before the update without a hitch. Also they work fine on my a-110.Think i'll try to go back to last firmware..Nothing was change on any of my hardware.
Lou
Update: So I downgraded to the firmware before the latest and all back to working perfect something in the new firmware my system didn't like..
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - Meister - 05-10-2010 11:01 PM
Like to see some improvements on the music front - the Playlist navigator works very well, now I just miss the add to"on-the-fly"-playlist!
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - djpollum - 05-11-2010 04:02 AM
(05-10-2010 09:18 PM)djpollum Wrote:(05-10-2010 08:44 PM)Adrgha Wrote:(05-10-2010 08:01 PM)Adrgha Wrote: I have to say it appears that way. I have tried 20 different combinations of the hdparm line I used before and it just won't work. I was so happy when I managed to fix this a while back because the spindown timer of 10 minutes is so incredibly annoying.
Ok, it seems like I have found a solution. I deleted the start_app.sh file and reinstalled lundman shell to rebuild it. I then added the /sbin/hdparm -S0 /dev/sda line and it seems to work again. So to anyone who has problems with getting settings in the start_app.sh file to work, try rebuilding it.
I followed your instructions. Deleted the start_app.sh file and reinstalled lundman shell. Got a new start_app.sh file created. Edited this file with Notepad++ (as suggested in http://www.networkedmediatank.com/showthread.php?tid=40209&pid=377287#pid377287) so the file format stays the same.
Unfortunately all this still didn't help...
Any more suggestions?
EDIT: Also all the settings of my NMT apps and my settings for NZBGET are also gone each time my PCH is being reset. This wasn't the case earlier, when everything worked fine...
EDIT: When I put the following lines in the start_app.sh file (doesn't matter where), the "date" command is being executed (file is being created) but NOT the "mount" or "cp" commands... !!!
Code:
date >/share/date.txt
mount /opt/sybhttpd/localhost.drives/USB_DRIVE_B-1/ /share/USB-DRIVE >/dev/null
mount /opt/sybhttpd/localhost.drives/USB_DRIVE_B-1/FTP/Download/Apps/ /opt/sybhttpd/localhost.drives/SATA_DISK/FTP/Download/USB-Apps >/dev/null
mount /opt/sybhttpd/localhost.drives/USB_DRIVE_B-1/FTP/Download/Fonts/ /opt/sybhttpd/localhost.drives/SATA_DISK/FTP/Download/USB-Fonts >/dev/null
mount /opt/sybhttpd/localhost.drives/USB_DRIVE_B-1/FTP/Download/Fotos/ /opt/sybhttpd/localhost.drives/SATA_DISK/FTP/Download/USB-Fotos >/dev/null
mount /opt/sybhttpd/localhost.drives/USB_DRIVE_B-1/FTP/Download/Movies/ /opt/sybhttpd/localhost.drives/SATA_DISK/FTP/Download/USB-Movies >/dev/null
mount /opt/sybhttpd/localhost.drives/USB_DRIVE_B-1/FTP/Download/MP3/ /opt/sybhttpd/localhost.drives/SATA_DISK/FTP/Download/USB-MP3 >/dev/null
cp -p /share/.ftp-settings/pureftpd.* /etc/RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - j0k3r - 05-11-2010 04:53 AM
(05-10-2010 08:44 PM)Adrgha Wrote: Ok, it seems like I have found a solution. I deleted the start_app.sh file and reinstalled lundman shell to rebuild it. I then added the /sbin/hdparm -S0 /dev/sda line and it seems to work again. So to anyone who has problems with getting settings in the start_app.sh file to work, try rebuilding it.
I tryed that solution, too. Still dont work
.
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - Gustafarian - 05-11-2010 06:47 AM
Age old advice... "if it ain't broke - don't fix it"
my c-200 works fine for me at the moment - I will be waiting for the UI change until I install something.
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - Tristanna - 05-11-2010 08:44 AM
(05-10-2010 09:22 AM)Tristanna Wrote:(05-08-2010 09:08 AM)sjones Wrote:(05-08-2010 05:14 AM)Nodak Wrote: File transfer performance has dropped. smb 11MB/s before 7.8 MB/s after.(setting: 10/100) not gig.
Revison 3 app is more of a mess now than before.
idk what to think of this firmware....
to add: This (TCP receive window) setting has screwed everything up. Network speeds are all over the place.
I set the TCP window size to 17,520 on my C200 and this gave the best performance. I use Microsoft Windows 2003 server and Windows 7.
Kind regards,
Steve
Hi,
After upgrade new firmware, my network speed decrease from 10Mb/s to 5 Mb/s !
What's the best value for TCP Windows size ? There are different answers...!
Thanks for your help.
After search on the net, I answer to my post
I test with 17,520 value in TCP Windows size and my network speed increase to 10Mb/s
(5 Mb/s with default value 5290 !)
For information: C-200 and Windows 7
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - gensbit - 05-11-2010 10:50 AM
(05-10-2010 11:50 AM)Burnerbum Wrote: Now I'm starting to get concerned. I got my PH last Nov, I think it was the 3rd batch. I've always updated online, never a problem. Even this FW and Apps went fine. The unit seems to work fine but I've been away for a few days and haven't used it much.
I don't know if I should leave it or go back. I hate to take a chance of it going down and having to ship it in, but also don't like taking the chance of reverting to a previous FW and having a problem there.
I think it would really be good if we could identify the build date on the units that are failing and how many there actually are.
Is this a couple units of thousands made or does it relate to a specific chip number.
If this is as serious as some seem to think I think a seperate thread should be started so we can get deeper into it.
Any thoughts would be appreciated.
I see at least two possibilities :
1) The defect is software (inside firmware update), occurring on some PCH.
2) The defect is hardware, perhaps in some flash memory chips
1) means each firmware update is a “sword of Damocles”, with a recovery procedure that does not work. RMA can solve this during warranty, but after that ?
2) means I will not be afraid of any further firmware upgrade … when the hardware will be fix. Like Burnerbum proposed, it will be good to identify such hardware (serial number, chip revision, manufacturing date, …)
Any official opinion would be appreciated, isn’t it ?
PS : Personally I did not have choice : my C200 returned to reseller yesterday, and I have to wait 3 ou 4 weeks... They told me I was not the first with the same problem (C200 bricked after firmware upgrade).
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - DNSATI - 05-11-2010 10:54 AM
I upgraded my C 200 to the lattes Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010).
Since then my Vide signal is gone. I was using a HDMI to DVI convert since my TV has no HDMI input. After downgrading Popcorn to previous firmware everything is back to "normal".
Other question: when I select a folder that contains mp3 and I want to play all of them my Popcorn just freezes. (on USB) Unfortunately this is not fixed in this Firmware either.
Did anyone have similar problems ?
thanks for the replies
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - Falven - 05-11-2010 11:19 AM
I thought i had no problems after the update except the playback of some BD's like Avatar. Now i see that most of the .iso files won't play anymore
Maybe i wil go back to the older firmware en wait till next firmware update....
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - shanecole - 05-11-2010 11:49 AM
(05-11-2010 11:19 AM)Falven Wrote: I thought i had no problems after the update except the playback of some BD's like Avatar. Now i see that most of the .iso files won't play anymore
When you say most of the .iso files won't play anymore, do you mean that nothing happen at all or just they don't make it to the trailers/menu?
That's my experience and as most of my stuff I haven't watched yet is in ISO format (I do my remux'ng after I've watched it if the extra space wasn't worth keeping online).
I've had to enable this new simple BD navigation to watch any of the ISO's now.
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - Falven - 05-11-2010 11:54 AM
When i start an .iso file then i hear the movie but the screen is black. Some of the movies will show the titlemenu but when the movie starts the screen goes black again...
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - Burnerbum - 05-11-2010 12:58 PM
(05-11-2010 11:54 AM)Falven Wrote: When i start an .iso file then i hear the movie but the screen is black. Some of the movies will show the titlemenu but when the movie starts the screen goes black again...
Are these DVD ISO, BR ISO or both you are having problems with?
RE: [C-200] Firmware 02-02-100428-19-POP-408 (02-02-100318-19-POP-408 Apps) (07.05.2010) - Falven - 05-11-2010 01:06 PM
DVD iso file's.