+- Networked Media Tank (http://www.networkedmediatank.com)
+-- Forum: General (/forumdisplay.php?fid=10)
+--- Forum: Firmware Releases (/forumdisplay.php?fid=11)
+---- Forum: Archive for Old Releases (Read Only) (/forumdisplay.php?fid=111)
+---- Thread: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) (/showthread.php?tid=47510)
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - tiefling - 01-01-2011 01:41 AM
My setup has been experiencing some severe problems since the December Firmware update...
1) I keep getting HDMI drop outs (although wether this is linked to the PCH or not is dubious)
2) I can't shut it down!!! Pressing the power button and holding it, which used to execute the shutdown process now just seems to kill the power. My NMT is becoming increasingly unstable due to this issue.
Does anyone have any suggestions on any workarounds I could use to deal with the power problem - This is driving me nuts!!?
PS: I installed the update to get the NMJ improvements for my music collection (I have about 1,300 albums). It appears that after about 1,000 NMJ becomes so slow as to be unusable. I've had to shelve this for performance upgrades.
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - halfelite - 01-01-2011 01:55 AM
does pushing power + delete still shut it down?
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - tiefling - 01-01-2011 04:27 PM
(01-01-2011 01:55 AM)halfelite Wrote: does pushing power + delete still shut it down?
Power + delete on the remote? That's a new one on me - I'll give it a try.
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - jiyong - 01-01-2011 04:58 PM
(12-19-2010 12:49 PM)jiyong Wrote: Anyone out there can test a BD with a 5.1 LPCM audio track? With the new firmware I get 1 second where my receiver says 5.1 LPCM, stutters and switches back to stereo. The DD and DTS do play fine in 5.1, so it's probably not my setup. With previous firmwares I didn't see this problem either.
It gets pretty annoying the C200 can't properly play Within Temptation - Black Symphony. Back to the August firmware for me (again).
Anyone that has success playing 5.1 LPCM from BD?
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - JoergGaBO - 01-01-2011 07:17 PM
well, would be nice if setting the volume to 0 would work for all files, some won't work and even -1 doesn't do the trick on all of them. This was never a problem in earlier versions so I assume it's a bug :-(
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - halfelite - 01-02-2011 12:51 AM
(01-01-2011 04:27 PM)tiefling Wrote: Power + delete on the remote? That's a new one on me - I'll give it a try.
yes power wait a second hit delete also turns the unit off.
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - bsb137 - 01-03-2011 05:23 AM
I updated to the new Firmware and nothing is working. I have the correct Apps and firmware however when i hit any key i get a request cannot be processed and have to reboot to scroll back to the maintenance page. I have tried several reboots and have tried a fresh install on the usb drive. I tried to go back to an older firmware before the NMJ introduction and i get an error that the update is not valid. I have one internal drive and have reformatted it through the maintenance function.
Thanks in advance
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - halfelite - 01-03-2011 06:54 AM
(01-03-2011 05:23 AM)bsb137 Wrote: I updated to the new Firmware and nothing is working. I have the correct Apps and firmware however when i hit any key i get a request cannot be processed and have to reboot to scroll back to the maintenance page. I have tried several reboots and have tried a fresh install on the usb drive. I tried to go back to an older firmware before the NMJ introduction and i get an error that the update is not valid. I have one internal drive and have reformatted it through the maintenance function.
Thanks in advance
Do you have an hd tv? NMJ is only HDtv
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - JockJam - 01-03-2011 09:15 AM
Last weekend I noticed that I cannot change the SRT subtitle position on the screen.
Has anyone also noticed this?
My C200 is patched at current FW level.
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - vledderos - 01-03-2011 09:24 PM
after successfully using this firmware for about a month I came across a problem with wireless network and I had to downgrade to October firmware to fixed it..
so what's the problem you say..
well my router was reset to factory settings so all new ip addresses we're given out by my router.. so also a new ip for my c-200
except my c-200 couldn't connect anymore.. it kept displaying "connecting" (auto settings) but I also noticed that my mac address ended at the number 74 instead of 75 in older firmware.. it wasn't a problem until I tried to receive a new ip address.. so that kept me figuring..
So I downgraded to last October firmware and well my c-200 connected in no time and my mac address was ending at 75 once again!
my question though, how is it possible that c-200 detects a different mac address for itself with different firmwares?? is it a bug?
anyway I have to stick to the October firmware for now..
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - Mick Seymour - 01-04-2011 07:42 AM
(01-03-2011 09:24 PM)vledderos Wrote: my question though, how is it possible that c-200 detects a different mac address for itself with different firmwares?? is it a bug?
anyway I have to stick to the October firmware for now..
The answer is it isn't a bug, just a change that wasn't in the release notes. The solution is somewhere earlier in this thread.
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - halfelite - 01-04-2011 07:47 AM
(01-03-2011 09:24 PM)vledderos Wrote: my question though, how is it possible that c-200 detects a different mac address for itself with different firmwares?? is it a bug?
anyway I have to stick to the October firmware for now..
Because there is multiple mac address. Technically the wired port and the MII port which is what the wireless card plugs into share the same MAC chip that is located on the c200 board itself as both the wired and wireless are what they call PHY they just make the physical connection to your network. Before the New firmware they were using the mac address of the PHY wifi card. They switched it over to use the Internal mac address for reasons they are not saying. More then likely it will have to do with new apps coming to the market. So its best to upgrade and just change your network to the normal mac address
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - kirby_blue - 01-04-2011 01:12 PM
Probably already mentioned but sorry I'm too lazy to read through the whole thread: with this rev, volume increments 2 by 2 which is nonsense IMHO.
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - papajohn - 01-06-2011 11:12 PM
(01-04-2011 01:12 PM)kirby_blue Wrote: Probably already mentioned but sorry I'm too lazy to read through the whole thread: with this rev, volume increments 2 by 2 which is nonsense IMHO.
I get this if I use eyecontroller app from my phone but a reboot sorts it. It was happening in the previous firmware too so I've give up on the app and things are fine. Are you bog standard remote or trying fancy apps from android/iphone?
RE: [C-200] Firmware 02-04-101206-21-POP-408 (02-04-101104-21-POP-408 Apps) (08.12.2010) - 5IsAlive - 01-07-2011 04:53 AM
Oh yeah, I upgraded to the December FW. Almost everything is working fine, except when I go into the NMJ and launch an ISO movie, the C-200 takes about 3-5mins before it will process a command from the remote. E.G. When I start a movie and press the STOP or PAUSE button on the remote... the movie keeps playing for about 3-5mins, then the commands are executed. But when I launch the movie from the list mode (pre-NMJ), any commands that are pressed on the remote are executed immediately.
Thus, everything else seems to be working fine. I hope that this is resolved soon, as I might have to go back to my MCE box.
-SPOCK'N'SPACE