[CSI] Community Software Installer 2.6.1 (OLD THREAD)

[Ger Teunis]

You're welcome. All the work has been done by the hosting provider where the servers are running.
For any free users where it still doesn't work: start a command prompt in windows (in administrator mode for vista) and execute:
ipconfig /flushdns
(or wait a few hours more)

[toto1er_]

(07-21-2009 06:36 PM)Ger Teunis Wrote:  All the work has been done by the hosting provider where the servers are running.

Sure but u still have been deeply involved on this issue, caused by others though. This is what i thank

[rswafford]

Hate to be a bearer of bad news, but I'm not able to connect to the new server (I'm in USA). Ping goes no where, and tracert dies as such:

Tracing route to nmtinstaller.com [80.86.81.49]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 192.168.1.1
2 3 ms 1 ms 1 ms 99-8-128-1.lightspeed.milwwi.sbcglobal.net [99.8.128.1]
3 22 ms 22 ms 21 ms 99-8-128-3.lightspeed.milwwi.sbcglobal.net [99.8.128.3]
4 * * * Request timed out.
5 22 ms 21 ms 21 ms 71.144.192.126
6 22 ms 21 ms 22 ms 71.144.192.120
7 21 ms 21 ms 21 ms bb2.10g5-0.milwwi.sbcglobal.net [151.164.43.203]
8 23 ms 23 ms 23 ms ppp-151-164-39-91.rcsntx.swbell.net [151.164.39.91]
9 23 ms 23 ms 23 ms te7-2.ccr02.ord03.atlas.cogentco.com [154.54.11.237]
10 24 ms 23 ms 23 ms vl3499.mpd02.ord01.atlas.cogentco.com [154.54.5.9]
11 53 ms 53 ms 53 ms te4-7.mpd01.ymq02.atlas.cogentco.com [154.54.28.10]
12 134 ms 134 ms 134 ms te3-1.ccr02.ymq02.atlas.cogentco.com [154.54.7.126]
13 134 ms 134 ms 134 ms te7-8.ccr02.fra03.atlas.cogentco.com [66.28.4.22]
14 137 ms 142 ms 136 ms te7-3.mpd01.fra03.atlas.cogentco.com [130.117.3.202]
15 139 ms 139 ms 139 ms 149.6.141.59
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

Trace complete.

[dc11ab]

I can see nmtinstaller.com:

Quote:$ ping nmtinstaller.com
PING nmtinstaller.com (62.75.221.106): 56 data bytes
64 bytes from 62.75.221.106: icmp_seq=1 ttl=51 time=62.813 ms
64 bytes from 62.75.221.106: icmp_seq=2 ttl=51 time=26.348 ms
64 bytes from 62.75.221.106: icmp_seq=3 ttl=51 time=56.113 ms
64 bytes from 62.75.221.106: icmp_seq=4 ttl=51 time=23.935 ms
^C
--- nmtinstaller.com ping statistics ---
7 packets transmitted, 6 packets received, 14% packet loss
round-trip min/avg/max/stddev = 23.935/42.777/62.813/17.403 ms

Quote:$ traceroute nmtinstaller.com
traceroute to nmtinstaller.com (62.75.221.106), 64 hops max, 40 byte packets
1 192.168.1.1 (192.168.1.1) 4.849 ms 0.877 ms 0.887 ms
2 () 7.211 ms 7.572 ms 7.670 ms
3 kbn-bb2-link.telia.net (80.91.253.244) 9.465 ms kbn-bb1-link.telia.net (80.91.253.193) 13.471 ms 9.523 ms
4 hbg-bb2-pos5-0-0.telia.net (213.248.65.125) 13.986 ms 14.017 ms 16.186 ms
5 ddf-b2-link.telia.net (80.91.251.192) 52.549 ms ddf-b2-link.telia.net (213.248.65.110) 52.239 ms ddf-b2-link.telia.net (80.91.251.192) 53.280 ms
6 tge-2-4.1294.bbr1.dus1.inetbone.net (213.248.98.138) 54.259 ms 56.946 ms 61.928 ms
7 tge-2-1.bbr1.fra3.de.inetbone.net (213.203.213.77) 23.833 ms 30.418 ms 32.267 ms
8 tge-5-1-0-498a.cr1.fra.routeserver.net (83.220.157.98) 58.424 ms 56.165 ms 55.764 ms
9 static-ip-85-25-225-142.inaddr.intergenia.de (85.25.225.142) 24.368 ms 23.761 ms 24.036 ms
10 sofia065.server4you.de (62.75.221.106) 24.113 ms 23.936 ms 24.108 ms

So it seems you have an issue with your ISP or someone else in between?

[rswafford]

Just sat down to note that your ping was going to a different IP than mine, and decided to give it another shot... works fine now DNS must not've propagated by when I wrote my first reply. Cheers

[Ger Teunis]

That would be really bad if this server was blocked in another country / hosting provider
The new server's IP address is 80.86.81.49 by the way, so you can check if the dns records in your dns server/cache is updated.

[Meanrabbit]

(07-21-2009 02:58 PM)Ger Teunis Wrote:  Server has been migrated to the new, much faster server.
<...>
Hopefully the 'Free' internet provider users are able to use CSI again.

Hi,

CSI is working perfectly from my side now...

Thanks a lot ....

[dc11ab]

Yup, it's updated now and works fine:

Quote:$ ping nmtinstaller.com
PING nmtinstaller.com (80.86.81.49): 56 data bytes
64 bytes from 80.86.81.49: icmp_seq=0 ttl=51 time=26.386 ms
64 bytes from 80.86.81.49: icmp_seq=1 ttl=51 time=28.764 ms
64 bytes from 80.86.81.49: icmp_seq=2 ttl=51 time=25.438 ms
^C
--- nmtinstaller.com ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 25.438/26.863/28.764/1.399 ms

[Ger Teunis]

Attention everybody
A new nzbget is going to be added tomorrow in CSI.
The update via CSI will reset your NZB's config so you need to configure you news server again.
This is done because a lot of users still seem to have an slightly bad configuration, the new package will have better default configuration.

Configuration after upgrade
I'd suggest using the "setup" link on the web interface to configure the newsserver's address ("NZBGET-SERVER" -> "NEWS-SERVERS") etc and not edit directly in the config file anymore.
After configuring the newsserver you need to use the "shutdown" button in nzbget webinterface and after that "start" button that will appear.
Alternatively you can use CSI to restart nzbget.

This version is equipped with an unpak script (also created by hugbug), so no configuration required anymore. Oversight is a good application to provider unpak and much more, reinstall Oversight after the update if you have Oversight installed at this moment.

Technical info: the unpak is configured in "POSTPROCESSING" settings of "NZBGET-SERVER" and not in "CONFIGURATION OF POSTPROCESSING-SCRIPT" of the webinterface settings.

[Ghandi II]

Try too install it on a p4 XP all .Net versions

get this error:

Er is een fout opgetreden in NMT Community Software Installer.exe en het programma moet worden afgesloten. Onze excuses voor het ongemak.

?????
-------------------------
Solved

Exe must be started from LOCAL disk, not (drive-letter assigned) network drive

[Ghandi II]

Excellent program,

can play all my dvd's now

Hope there will be possible to add visualisations (Like XBMC) during music play too (or is it allready???).

Better: Hope XBMC will be added as application

- Ghandi II -

[dc11ab]

Off topic: Ghandi II! UHF is a classic...

[RedSoy]

Hello everyone,
I just bought this little marvel that is the pch a-110. And I am very happy to see that there is a very willing community moding tools for it (in fact it is a lie, I knew it before buying it since one of my best friends has shown me the tools and this forum and this was what decided me to buy one). < /mylife>

I have tried to install a few things using CSI and I am not very successful for now. CTorrent worked fine, ldvd also, and Skin Manager 2.6 had errors after installation (mv : cannot move a directory (linked to torrents if I remember well, stupid me I didn't save the error)).

My main problem is that it is not installed and will not install again (says it is already installed).
I have tried the "Clean" command and it did not work, keeps saying it is already installed (the NMT re-installed everything after a reboot), in fact it worked, but it is obviously not enough).
I have tried the "DeepClean" command and it did nothing. After a reboot of the NMT, no request to install the standard apps again. I have tried to force it, but it tells everything is updated and there is nothing new.
Tried the Clean again after this and it re-installs everything. DeepClean again, nothing happened (I'm used to check things twice before saying it doesn't work).

Is there a known issue with the DeepClean command ?

Is there a "remove specific app" planned in CSI in future upgrades ? (thinking about it, this would force mods devs to plan themselves some king of rollback, since removing is not the only thing to do, there is probably a "rename content" back to do also).

Is there a simple way to remove completely Skin Manager (or any app) so I can try to install it again ? (did not use telnet since my studies, 11 years ago)

Thanks from advance, and sorry if I ask things answered somewhere else, I am a bit lost with this forum search.
Cheers,
RedSoy

[Ger Teunis]

Hi Redsoy,

SkinManager is an application which doesn't integrate very well in the CSI at the moment.
Also other problems with skins might occur when using Skin Manager.

CSI already can uninstall apps, most of them. Some applications (if I am corrent also SkinManager) aren't updated to the new application format.
Regarding the DeepClean: I will have to look into that, it should function fine though.

So in short: uninstall works for applications, except for some 'old' applications.
The old applications do not have a star [*] in from of their name in the first post, look there for more information.

This only issue here is DeepClean, I'll have to take a look into that.

[shadowcode]

Hi, just installed CSI today.
Having a bit trouble with some applications not installing or uninstalling properly. Seeing Ger Teunis's recent post, I can only guess that there's some transitioning going on between an old version and a new version and that not all developers have updated their packages (yet?)?

Could this cause my trouble? For example; installing aMule and/or TorrentWatch will not change their 'State' (stays on "Not Installed"). Installation/Uninstallation works fine for DropBear/Transmission/Llink (presumably; only uninstalled LLink though to test).
Also, TorrentWatch seems to be broken, but that's something I'll look into tomorrow.