[nzbget] NZBget 0.7.0 download and discussion

[Ger Teunis]

README - IMPORTANT
NEW WEBBROWSER ADDRESS FOR WEBUI
HTTP://IP-ADDRESS:9999/NZBget_web/


The final of 0.6.0 of nzbget got released two days ago.
I've created a package for the NMT.
Please use the CSI to install the new version.
This version includes an optimized unrar and par2 binaries.

For anybody not able to use CSI, use the following steps:

1. Download:
http://repository.nmtinstaller.com/Appli...nzbget.zip
2. Extract to the root (top directory) of you HDD (using FTP or SMB)
3. Open telnet to your NMT
4. Type the following commands:

Code:

cd /share
chmod a+x installer.cgi
./installer.cgi

This should install nzbget fine for the non-CSI-ers.

[Sevennl]

Nice one.

Did it all by hand which was kind of a pain
But this way it's much much easier.

Could you explain what these optimized versions of unrar and par 2 do.

[RavenNL]

Nice but am getting an error while uploading a nzb manually

"Error: Check the path and the permissions for the upload directory (option NzbDir)"

Tried to reinstall it again but same problem. I've installed it through the community installer

[Ger Teunis]

Optimizations> just optimal compiler switches for the MIPS cpu. Did not write any manual code.

Regarding the permissions error; I will update the installer.
Could you open telnet and do a

Code:

chmod -R 777 /share/.nzbget/nzb

Does that solve your problem?

[RavenNL]

(03-22-2009 03:14 PM)Ger Teunis Wrote:  Regarding the permissions error; I will update the installer.
Could you open telnet and do a

Code:

chmod -R 777 /share/.nzbget/nzb

Does that solve your problem?

Unfortunatley not, I enter the command and get a new clean line, so no error message's but I try to upload it manually again I get the same error message

[Ger Teunis]

It's fixed, please reinstall.
For some reason a template settings file is used during a file move action in nzbget web.

(future reference for myself: change $NzbDir in template-settings.php because file upload uses that that).

[RavenNL]

(03-22-2009 04:52 PM)Ger Teunis Wrote:  It's fixed, please reinstall.
For some reason a template settings file is used during a file move action in nzbget web.

Thanks works fine now

[PiNPOiNT]

NZBget is working but then locks up my entire PCH after starting to download a file for a while.

Any ideas?

[Camstar]

(03-25-2009 04:04 AM)PiNPOiNT Wrote:  NZBget is working but then locks up my entire PCH after starting to download a file for a while.

Any ideas?

Same problem on my A110. It starts working, but after some time, it locks up the PCH.

[PiNPOiNT]

(03-28-2009 01:22 PM)Camstar Wrote:  Same problem on my A110. It starts working, but after some time, it locks up the PCH.

How many connections did you enable?
I read somewhere else that the PCH can only handle 2 or 3 connections, any higher and it locks up.

I "was" using 10, but i havent tried lowering it yet.

I'll get back to this thread when i have and post the results

[Camstar]

(03-28-2009 03:42 PM)PiNPOiNT Wrote:  How many connections did you enable?
I read somewhere else that the PCH can only handle 2 or 3 connections, any higher and it locks up.

I "was" using 10, but i havent tried lowering it yet.

I'll get back to this thread when i have and post the results

I have 4 threads enabled, but I will try lowering it to 2. Maybe it will help. I'll report back.

[Camstar]

(03-28-2009 05:06 PM)Camstar Wrote:  I have 4 threads enabled, but I will try lowering it to 2. Maybe it will help. I'll report back.

Doesn't do anything. After about 15 minutes the PCH stops responding. Now performing a chkdsk, maybe this helps.

[Ger Teunis]

Anyone here with telnet skills and want to test an other build, to try if that build is more stable?
You need to have stability issues now!

Download the binary from
http://nmt.homeip.net:8080/Downloads/nzbget
and store it in /mnt/syb8634/bin
Mare sure you set the execute attribute and restart nzbget.

[toker-a110]

PCH A110 (latest firmware 01-17-090125-15-POP-403), NZBget 0.6.0 Final and NZBget web interface 1.3. No problems so far.
I am running 6 connections on NON SSL and installed using CSI.
PCH download at 1400KB/s still 200-300KB/s down compared to PC. Noticeable unrar improvement in speed.

------------Current Status--------------------
NZBGet version 0.6.0

uptime: 12:47:47
download time: 1:00:00
average download rate: 1359 KB/s
total downloaded: 4.66 GB
free disk space: 925.9 GB

[Camstar]

(03-28-2009 07:05 PM)Ger Teunis Wrote:  Anyone here with telnet skills and want to test an other build, to try if that build is more stable?
You need to have stability issues now!

Download the binary from
http://nmt.homeip.net:8080/Downloads/nzbget
and store it in /mnt/syb8634/bin
Mare sure you set the execute attribute and restart nzbget.

Ok, done it, and it is running (at the moment). One thing that I've noticed in the previous version is the degredation of the download speed. It started at around 1200, but then went down to around 245, in about 5 to 10 minutes and then the PCH stopped responding.

It has been working now since 10 minutes at 1200, no degredation of speed so far


Just checked again, now at 1350! Great job!

Will keep you informed. Thanks.

PS Kom je uit Nederland?

Chris.

---

(03-29-2009 05:24 PM)Camstar Wrote:  Ok, done it, and it is running (at the moment). One thing that I've noticed in the previous version is the degredation of the download speed. It started at around 1200, but then went down to around 245, in about 5 to 10 minutes and then the PCH stopped responding.

It has been working now since 10 minutes at 1200, no degredation of speed so far


Just checked again, now at 1350! Great job!

Will keep you informed. Thanks.

PS Kom je uit Nederland?

Chris.

No luck, the speed stayed high, but after a couple of minutes the telnet session was ended, and the PCH is not responding.

Maybe there's something wrong with the HDD. Will try a chkdsk.