Threaded Mode | Linear Mode

Erikn89nl · 08-16-2010, 08:55 AM

For some reason, my NZBGet has recently stopped being able to postprocess anything. Sometimes, it only extracts a sample.mkv and deletes everything else, as if it got what it wanted from the 1GB of data.
When I copy the downloaded data to my pc, and par and unrar them there, there's no problem.

Halp!

sprogger · 08-18-2010, 09:19 AM

Team
Further to my post about NZBGet V0.5.1 hanging my HDX1000 I have installed 0.7.0 using CSI ..

When I try to access the web interface using
HTTP://My HDX IP-ADDRESS:9999/NZBget_web/

I get Internet Explorer Cannot display the web page ...

When I use the standard interface (port 8066) I get the V1.2 interface which now tells me I am running NZBget V0.7.0 ... (so thats good news)

Also ..

In my nzbget.conf file I have specified 6 news servers (3 x SSL, 3 X non SSL) on the assumption this will help resolve "lost" files ...

Is this a good idea?

I have also seen much discussion on how many server connections you should specify .. I currently have them set at 8 .. is this too many (not enough)?

Cheers
Sprogger

sprogger · 08-20-2010, 05:52 AM

Team
Just in case someone is searching this thread ..

This morning I could not access NZBget on either port 8066 and 9999 (Internet explorer cannot display the web page) ..

There was an entry earlier on this thread where user had issue with lighttpd .. deinstalled and replaced with CSI Webserver (which apparently uses port 9999)..

I tried this with no success ... I have now removed NZBget 0.7 and am back running with NZBget V0.5 (on port 8066)

Hope this helps someone

Cheers
Sprogger

Zito · 08-20-2010, 10:18 PM

Hi

I have a weird problem with Nzbget (at least I think it is Nzbget which is causing it). Somehow it makes the whole filesystem on my PCH C-200 disappear after downloading for a while. The C-200 itself doesn't crash, but when I try to access my usb-pen-drive (where all the apps are installed) via my TV it just says "No files avaliable" or something like that.

Nzbget is set to download to my 2tb ext3-formatted internal hdd.
This is what the log says when the problem occurs:

"Error reading diskstate for file /Share/Apps/NZBGet/.nzbget/queue/1011"
"Could not open file /Share/Apps/NZBGet/.nzbget/queue/1052"

And so on for every queue file.

I also get a 404 error when trying to access the NZBGet web interface (or the oversight web-interface for that matter)

I am using the latest NZBGet 0.7.0-testing-r380 and the latest test version of Oversight if that matters.

JeeBee · (This post was last modified: 08-27-2010 08:18 AM by JeeBee.)

Has someone an idea what goes wrong? I've installed the NMT Apps on a USB Stick on my C200 (fresh install), after that I changed the media source to my NTFS formatted HDD and downloading with NZBGet puts the files on my HDD (in share/Download) but unpacking doesn't work, I get an error:

INFO Thu, 26 Aug 2010 18:00:56 +0000 Executing post-process-script for u2/U2 - Frankfurt - 10-08-2010 - IEM
ERROR Thu, 26 Aug 2010 18:00:56 +0000 Could not start script: No such file or directory

The post-process-script will not unpak my RARs, do I have to change the path on another way so the unpak.sh will be found or does this error mean something else? Deleting the NZB and PARs just works fine but I looks like that NZBGet can't locate the unpak.sh

If it can't be done, is it possible to unRAR the files manually?

JeeBee · 08-28-2010, 12:17 AM

I"ve installed the new firmware from 26 aug for de C-200 and installed the apps with a fresh setup on de HDD, so everything is on one device now (the apps and the media source (download folder)).

I've still the exact same problem when downloading with NZBGet:

INFO Fri, 27 Aug 2010 22:36:20 +0000 Executing post-process-script for Tipweek 3510/Tipweek 3510.rar
ERROR Fri, 27 Aug 2010 22:36:20 +0000 Could not start script: No such file or directory
INFO Fri, 27 Aug 2010 22:36:20 +0000 Completed post-process-script for Tipweek 3510/Tipweek 3510.rar

When I checked the config with the webinterface for the NZBGet I noticed empty paths under:

CONFIGURATION OF POSTPROCESSING-SCRIPT
and
POSTPROCESSING

which paths do I have to configure?

I tried all kind of combinations after using Google but can anyone tell me what is in his/her configuration?

Goldrolly · 10-23-2010, 11:09 PM

I did a new install of my C200... never should have done that...

Before my tv series were downladed and unpacked in a folder on my internal drive (sata_disk) and my movie were unpacked in the folder movies.

Now i cant get that to work anymore. All I can do is unpack into the download folder, that is not what I want, obviously.

Can anybody help me setting up both paths or atleast another folder to unrar to?

I treid editing the path in the gui but I can't seem to get it to work. It does unpack but the files I need are msyteriously lost after unpacking

Thnx in advance

PrairieSailor · 11-19-2010, 02:13 AM

Started getting these error regularly. Don't know what's changed in the last week but it just started happening.

Post-processing doesn't complete.

Code:

WARNING    Thu, 18 Nov 2010 19:09:43 +0000 9 of 275 article downloads failed for "boardwalk. empire. s01e09. 720p. hdtv. x264. core2hd. nzbmatrix- api. nzb. 9/ _ _ . vol108+82. PAR2"

ERROR    Thu, 18 Nov 2010 19:07:36 +0000 Could not receive data on socket: ErrNo 11, Resource temporarily unavailable

WARNING    Thu, 18 Nov 2010 19:07:15 +0000 Article boardwalk. empire. s01e09. 720p. hdtv. x264. core2hd. nzbmatrix- api. nzb. 9/ _ _ . vol108+82. PAR2 [248/ 275] @ us. news. astraweb. com failed: Wrong message- id, expected , returned

WARNING    Thu, 18 Nov 2010 19:06:58 +0000 Download boardwalk. empire. s01e09. 720p. hdtv. x264. core2hd. nzbmatrix- api. nzb. 9/ _ _ . vol108+82. PAR2 [181/ 275] failed

ERROR    Thu, 18 Nov 2010 19:06:48 +0000 Could not receive data on socket: ErrNo 11, Resource temporarily unavailable

WARNING    Thu, 18 Nov 2010 19:06:44 +0000 Article boardwalk. empire. s01e09. 720p. hdtv. x264. core2hd. nzbmatrix- api. nzb. 9/ _ _ . vol108+82. PAR2 [181/ 275] @ news. astraweb. com failed, could not fetch article: 430 No such article

Is this a news server problem? NZBGet, or unpak?[/i]

kwangomango · 12-10-2010, 10:24 PM

Is there anyway of having items set to 'Paused' by default when they are added to the queue. I add a lot of nzbs to my nzbmatrix bookmarks via my phone. These get added to the nzbget queue via feedtime but i'd like them set as paused until i manually i manually start them.

Cheers.

Cherek · 12-16-2010, 11:33 PM

Hi guys,
Well I can't for the life of me, understand why am not able to make it work, but here goes.
I've got an a200 I'm trying to set up with NZBget, Oversight and later Transmission.
At home I have an A100 doing fine (although today I sam some SSL probs...)
Anyway on the A200 I'm experiencing all kinds of dificulties.

One that is persistent at the moment is

Code:

Thu, 16 Dec 2010 23:20:35 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:20:56 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:20:56 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:21:17 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:21:17 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:21:38 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:21:38 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:21:59 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:21:59 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:22:20 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:22:21 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:22:42 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:22:42 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:23:03 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:23:03 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:23:24 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:23:24 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13 

INFO Thu, 16 Dec 2010 23:23:45 +0100 Collection Glee S02E10. nzb found 

ERROR Thu, 16 Dec 2010 23:23:45 +0100 Could not rename file / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb to / opt/ sybhttpd/ localhost. drives/ SATA_ DISK/ nzbget/ nzb/ Glee S02E10. nzb. queued! Errcode: 13

As you can see a continuous loop with renaming a file that was put in the NZB folder.
I saw this problem with another NZB as well, so it's not the NZB that's an issue.
The other problem I was having earlier was that NZBget wouldn't unpack anything. There was a permission problem and it went out of the postprocess.

I read somewhere that could be because of the installation order. But I reinstalled all: first NZBGet then Oversight.

The main difference between my setup and this A200 is that mine is for downloading to a USB Disk, which is why I have the whole path showing for the main dir.
The A200 has a internal disk, but I still used the full path. But I can imagine why that would be wrong?

zztop3 · (This post was last modified: 12-27-2010 04:19 PM by zztop3.)

Hello,
After i updated to nzbget 0.7.0 using NMT CSI i cant use the webinterface. Installation was successful and its running fine (dl nzb files and extract to folders). I click on the link in the csi window, http://pch-a200:9999/NZBget_web/
browser opens up but it cant show the page.

Do i need to install any more programs to get this to work?

I solved the problem, i just realized i also installed Lighttpd - 1.4.24 after i installed the nzbget 0.7.0.
So i stopped the Lighttpd - 1.4.24 and uninstalled it.

then i tried to use the webinterface and it worked again.

NZBGet 0.7.0-testing-r380

Web Interface 1.4 (testing-7)

Hope this helps somebody else also.

cheers.

mortalsin · 12-30-2010, 09:47 AM

is it possible to acces the webinterface by smartphone ( samsung galaxys android)
??

CobraGuy · 01-03-2011, 08:00 PM

Not sure about your phone, but it works fine on my Nokia N900

mortalsin · 01-04-2011, 12:59 PM

how ?
how do you approch it ?
when i give standard url on my phone it does't connect,
when i doe the same thing on the pc is does work

ModdeyDo · (This post was last modified: 01-05-2011 08:47 PM by ModdeyDo.)

I am having the same access problem as you, I get around it by restarting lighttpd 1.4.23 in CSI. That does the trick everytime.

ModdeyDo

(08-18-2010 09:19 AM)sprogger Wrote: Team
Further to my post about NZBGet V0.5.1 hanging my HDX1000 I have installed 0.7.0 using CSI ..

When I try to access the web interface using
HTTP://My HDX IP-ADDRESS:9999/NZBget_web/

I get Internet Explorer Cannot display the web page ...

When I use the standard interface (port 8066) I get the V1.2 interface which now tells me I am running NZBget V0.7.0 ... (so thats good news)

Also ..

In my nzbget.conf file I have specified 6 news servers (3 x SSL, 3 X non SSL) on the assumption this will help resolve "lost" files ...

Is this a good idea?

I have also seen much discussion on how many server connections you should specify .. I currently have them set at 8 .. is this too many (not enough)?

Cheers
Sprogger

HDX1000 : NZBGet 0.7.0-testing-r380 : Web Interface 1.4 (testing-7).
Problem : Everything is downloaded fine, but unpacking is taking ages, 5 gigs took nearly 11 hours to unpack! the hdx is doing nothing while this is going on, mainly because nothing answers because of the overload the unpacking is causing.
Anyone else having this problem ?

ModdeyDo

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	NZBGet 9.0/10.0 discussion	hugbug	471	37,015	Yesterday 12:26 AM Last Post: jhmiller
	sickbeard and download folder help!	naboull1	1	210	05-11-2013 06:41 PM Last Post: naboull1
	Transmission. How to change download paths to other HDD connected to A300 ?	djhifi	0	232	05-07-2013 01:05 AM Last Post: djhifi
	Torrentexpander: automatic renamer \| build .nfo \| download poster & fanart \| NMJ	Jannyy	190	38,800	04-26-2013 09:50 PM Last Post: bassie112
	Can't save NZBGet Web Interface settings	jurjongo	0	426	04-15-2013 09:57 PM Last Post: jurjongo
	Download to NAS or other networked storage.	kerberosvx	1	429	04-09-2013 01:24 PM Last Post: chris57
	NZBGet download x pars instead of one/all/none	shazada	0	411	04-07-2013 03:46 PM Last Post: shazada
	Single download at a time ?	divine	1	398	03-28-2013 08:44 PM Last Post: Willem53
	NZBGet on the PCH/NMT Manual and F.A.Q.	Philos	147	176,023	03-10-2013 11:33 AM Last Post: blobe
	Script to send NZB(url) to NZBGet using iOS	mrmaximum	18	6,949	03-05-2013 12:23 AM Last Post: rvdet