[nzbget] NZBget 0.7.0 download and discussion

[lordy]

When you install oversight there is no need to move unpak.sh. It should set up everything correctly.
Now that you have moved it you should post your PostProcess setting in nzbget.conf and also check /share/Download/nzbget.log if it exists.

[farg0]

this is my log, is there anything obviously wrong?

Code:

INFO    Thu, 30 Apr 2009 16:44:56 +0000 Collection +++DOWNLOAD+++ completely downloaded
INFO    Thu, 30 Apr 2009 16:44:56 +0000 Queueing +++DOWNLOAD+++ for par-check
INFO    Thu, 30 Apr 2009 16:44:56 +0000 Executing post-process-script for +++DOWNLOAD+++
INFO    Thu, 30 Apr 2009 16:44:56 +0000 : '/share/Apps/oversight/unpak.sh' '/share/Download/+++DOWNLOAD+++' '/share/Apps/NZBget/.nzbget/nzb/+++DOWNLOAD+++.nzb' '/share/Download/+++DOWNLOAD+++.par2' '0' '1' '0' ''
INFO    Thu, 30 Apr 2009 16:44:56 +0000 :chown -R nmt:nmt .
INFO    Thu, 30 Apr 2009 16:44:56 +0000 merge_unpak_settings [/share/Apps/oversight/unpak.cfg]
WARNING    Thu, 30 Apr 2009 16:44:56 +0000 unpak_nzbget_bin=/share/Apps/NZBget/bin/nzbget
WARNING    Thu, 30 Apr 2009 16:44:56 +0000 unpak_nzbget_conf=/share/Apps/NZBget/.nzbget/nzbget.conf
WARNING    Thu, 30 Apr 2009 16:44:56 +0000 unpak_nzbget_conf=/share/Apps/NZBget/.nzbget/nzbget.conf
DETAIL    Thu, 30 Apr 2009 16:44:56 +0000 Post-Process: /share/Apps/oversight/unpak.sh: line 2223: which: not found
WARNING    Thu, 30 Apr 2009 16:44:56 +0000 unrar : /share/Apps/NZBget/bin/unrar
DETAIL    Thu, 30 Apr 2009 16:44:56 +0000 Post-Process: /share/Apps/oversight/unpak.sh: line 2223: which: not found
WARNING    Thu, 30 Apr 2009 16:44:57 +0000 par2: /share/Apps/NZBget/bin/par2
INFO    Thu, 30 Apr 2009 16:44:57 +0000 unpak:17:44:57 unpak version [20090429-1BETA]
INFO    Thu, 30 Apr 2009 16:44:57 +0000 unpak:17:44:57 script_folder=[/share/Apps/oversight]
INFO    Thu, 30 Apr 2009 16:44:57 +0000 unpak:17:44:57 ARGS: '/share/Apps/oversight/unpak.sh' '/share/Download/+++DOWNLOAD+++' '/share/Apps/NZBget/.nzbget/nzb/+++DOWNLOAD+++.nzb' '/share/Download/+++DOWNLOAD+++.par2' '0' '1' '0' ''
INFO    Thu, 30 Apr 2009 16:44:57 +0000 unpak:17:44:57 ====== Post-process Started : +++DOWNLOAD+++ 17:44:57======
INFO    Thu, 30 Apr 2009 16:44:57 +0000 unpak:17:44:57 config: Parchecking enabled in unpak.sh
WARNING    Thu, 30 Apr 2009 16:44:57 +0000 unpak:17:44:57 config: IF LoadPars is not all then AllowReProcess should be yes in nzbget.conf
INFO    Thu, 30 Apr 2009 16:44:57 +0000 Completed post-process-script for +++DOWNLOAD+++

[lordy]

Yes >/share/Apps/oversight/unpak.sh: line 2223: which: not found

My bug. New beta on its way. I spotted that one last night. This was some code that was trying to find the nzbget binary in a portable way. I have to remember to remove telnet busybox from my path when testing stuff! Sorry for any time you wasted, that's beta

[lordy]

New beta version uploaded to the usual places. Should fix 'which' issue.

[vlieter]

(04-30-2009 07:09 PM)lordy Wrote:  New beta version uploaded to the usual places. Should fix 'which' issue.

See post 135

Everything is working fine now: Thanks again for all your work

[thekiltedwonder]

(03-22-2009 12:46 PM)Ger Teunis Wrote:  1. Download:
http://repository.nmtinstaller.com/Appli...nzbget.zip
2. Extract to the root (top directory) of you HDD (using FTP or SMB)
3. Open telnet to your NMT
4. Type the following commands:

Code:

cd /share
chmod a+x installer.cgi
./installer.cgi

This should install nzbget fine for the non-CSI-ers.

Where do I get installer.cgi from? It wasn't in the folder when I extracted nzbget.zip and it's not in /share.

Thanks in advance.

[Gert-Jan]

NZBget would be the perfect tool for me because I only have a laptop and a HDX1000 with a Western Digital 1 TB drive.

To bad my browsers indicates 'Internet Explorer cannot display the webpage'.
Chrome indicates the link does not work

this is the link I use : http://192.168.1.103:9999/NZBget_web

First I installed the latest NMT apps, then restarted the Usenet client via the setup.
Too bad I could not reach the client through http://192.168.1.103:8066/

Then I installed 0.6.0 with CSI, same problem
Then I installed 0.7.0.308 with CSI, same problem

Restarted the client with CSI and also restarted the NMT itself.

Still a non working link, anyone got an idea were to start?

[Ger Teunis]

New release: version 0.7.0.309 and 0.6.0.1
These two releases fix the "Usenet" button on the NMT again.
No other changes have been made.

[hugbug]

Ger Teunis
Since the static binary of nzbget doesn't use any libraries all files in directory "lib" can be removed from the package:
libgcrypt.so.11
libgnutls.so.26
libgpg-error.so.0
libpar2.so.0
libsigc-2.0.so.0

[Ger Teunis]

(05-24-2009 11:04 AM)hugbug Wrote:  Ger Teunis
Since the static binary of nzbget doesn't use any libraries all files in directory "lib" can be removed from the package

I'll remove them with the next version okay?

[chrisballuk]

To the problem of not accessing the web int, if you are on wifi make sure you have forward port 9999 to your pch in your router settings or port 8066 if using the old version of nzbget. google port forwarding if you don,t know how to. Have you tried hard wiring your laptop into your router it should work.

[Gert-Jan]

(05-24-2009 04:37 PM)chrisballuk Wrote:  To the problem of not accessing the web int, if you are on wifi make sure you have forward port 9999 to your pch in your router settings or port 8066 if using the old version of nzbget. google port forwarding if you don,t know how to. Have you tried hard wiring your laptop into your router it should work.

thanks 'chrisballuk'!
I will try this tonight..

[Gert-Jan]

(05-25-2009 01:41 PM)Gert-Jan Wrote:  thanks 'chrisballuk'!
I will try this tonight..

too bad, still not working.
I forwarded both port 9999 and 8066 for the old and the new (0.6.0) version and tested the port forwarding with PFPortchecker with succes.

after that I tested the two urls but i get the same error, I checked my MacAfee firewall activity but everything was fine.

I also checked a wired connection but this did not resolve the problem.

Any ideas?

thanks in advance!!

[Gert-Jan]

I have the same problem with the torrent web interface.

When I enable the Torrent client in the setup I can not reach Transmission on port 8077 but I can reach the old Torrent client BPTP on 8883

Hope someone has a solution

[Gert-Jan]

All right!

Friend of mine fixed the problem with telnet.

It had something to do with starting the http server and rights for starting the server.

All is working now!

cheers