Threaded Mode | Linear Mode

Ger Teunis · 05-05-2009, 08:45 PM

(05-05-2009 08:42 PM)maccent Wrote: Hi

I tried to install btpd with csi but it seems that i cant do it.

The adress "http://nmt:9999/BTPD_web/" it gives me the following error
"btpd socket not found". The same for gaya.

I have an egreat m31b with the latest 201 firmware

It doesnt have the gasgle feature, if that maters. And also i have a fourth ntfs partition on my internal disk.

Other applications as telnetd or ntfs3g are functional

My bad, please install again. Had made a change without testing it first.

maccent · 05-05-2009, 09:05 PM

(05-05-2009 08:45 PM)Ger Teunis Wrote: My bad, please install again. Had made a change without testing it first.

Thank you for your quick responce

Also It seems that there is another small cosmetic glitch in web interface

The calculation for the disk usage / free it is not acurate, because it calculates perhaps the whole disk and not the spesific partition.

As i told in mmy previous message, I have four partitions in my internal disk, with the last partition as ntfs. I am downloading on the ext3 partition which is the third. Perhaps the web interface calculate the space for the last disk partition and not the space where is the application or where you downloading.

Ger Teunis · 05-05-2009, 09:11 PM

(05-05-2009 09:05 PM)maccent Wrote: Also It seems that there is another small cosmetic glitch in web interface

The calculation for the disk usage / free it is not acurate, because it calculates perhaps the whole disk and not the spesific partition.

As i told in mmy previous message, I have four partitions in my internal disk, with the last partition as ntfs. I am downloading on the ext3 partition which is the third. Perhaps the web interface calculate the space for the last disk partition and not the space where is the application or where you downloading.

The web interface is make by Shurup, I donno if he is monitoring this topic. Could you contact him directly?

maccent · 05-05-2009, 09:19 PM

I'll try to find him and send him a private message. Is that what you suggest?

Also what service i must have running in order to install and start btpd. It seems that it needs ftp service. Can i Install it to start with samba perhaps.

The same "problem" is also with other applications that i try.

Is there a posibility in CSI to tell us what service we must have enabled? Or even better to ask as about the service to use.

Thanks again

Ger Teunis · 05-05-2009, 09:36 PM

PM is best i think.
FTP server should on at all times. The rest is optional.
I can add that to the intruction page I guess.

coendeurloo · 05-13-2009, 01:49 PM

Hi Ger, I have a problem with the downloaded torrents. I think something is wrong with the folder permissions (lots of people have this issue it seems) since I can't move the downloaded files out of the /Download folder into another folder, unless I do a reboot. Needless to say, that is a bit annoying. I don't have the Casgle client running or anything, plus I have the latest BTPD version installed with the CSI, and removed the torrent from the webinterface so it shouldn't be active.

Is there anything we can do to help you fix this?

Ger Teunis · (This post was last modified: 05-13-2009 06:44 PM by Ger Teunis.)

(05-13-2009 01:49 PM)coendeurloo Wrote: Hi Ger, I have a problem with the downloaded torrents. I think something is wrong with the folder permissions (lots of people have this issue it seems) since I can't move the downloaded files out of the /Download folder into another folder, unless I do a reboot. Needless to say, that is a bit annoying. I don't have the Casgle client running or anything, plus I have the latest BTPD version installed with the CSI, and removed the torrent from the webinterface so it shouldn't be active.

Is there anything we can do to help you fix this?

That is weird. Via what interface are you moving the files?
Using "smb" / file sharing or via the NMT's interface itself?

Are you able to move files? And what about folders?
Is it reproducible with new downloads (no continue) as well?

coendeurloo · 05-14-2009, 09:12 AM

(05-13-2009 06:44 PM)Ger Teunis Wrote: That is weird. Via what interface are you moving the files?
Using "smb" / file sharing or via the NMT's interface itself?

Are you able to move files? And what about folders?
Is it reproducible with new downloads (no continue) as well?

I've tried to cut and paste a folder on a windows xp computer (just a regular network shared folder) from the /share/Download to /share/Video, I haven't tried it using the popcorn menu itself. I did try it using the File Manager 1.0.4 but it didn't work (I could cut, but the 'paste' option was greyed out).

I haven't tried to move the file itself, because I needed to move the whole folder. It is reproducable as I've had this problem with all torrents so far.

ilias · 05-14-2009, 04:49 PM

(05-13-2009 01:49 PM)coendeurloo Wrote: Hi Ger, I have a problem with the downloaded torrents. I think something is wrong with the folder permissions (lots of people have this issue it seems) since I can't move the downloaded files out of the /Download folder into another folder, unless I do a reboot. Needless to say, that is a bit annoying. I don't have the Casgle client running or anything, plus I have the latest BTPD version installed with the CSI, and removed the torrent from the webinterface so it shouldn't be active.

Is there anything we can do to help you fix this?

I have the same problem Huh

pini · 05-20-2009, 12:59 AM

Dear Community of the NMT Owners,

I have getting problem when I want to start the BTPD program on my Popcorn Hour. I tried to reach the BTPD on the web addres what I saw on the instruction when the installation has been finished. I did do every steps what I saw in those instructions. First of all I thought I'm not enough smart to solve this problem. But when I uninstalled BTPD and install Transmission I have got the same problem when I wanted to start this program on the NMT A-100, but the difference is the Transmission was reachable on the webaddress.
So please tell me somebody what shoul I do in this case.
I would be apperiacted for your answers!

sattertje · 05-24-2009, 09:39 PM

Hi,

I'm using BTDP and when I upload the file it is going great, only the upload is often far better than the download (dl 150kb, upl 350kb)

Also I want to use the torrent app from DAX. So you can download torrent files by only using youre PCH. But when I click the link to the torrent file, it is automaticly picked up by the standard torrent client.

How can I let BTPD pick up the .torrent files?

Thanks
Sattertje

Squeek · 05-26-2009, 04:26 PM

I've also noticed an inability to move directories created by BTPD - no amount of chown and chmod commands seems to help. I haven't tried rebooting, as mentioned above, to see if this clears some kind of lock. If it is something like this I'm out of my depth Big Grin

I'm not sure if its only where a dir is created with files inside it, or also when files are created at the top level of the download location - I haven't noticed it on individual files - but I can certainly consistently reproduce it with torrents that contain multiple files and a directory to put them in.

raskolnikoov · (This post was last modified: 05-29-2009 11:23 PM by raskolnikoov.)

can i make my popcornhour unrar automatic the torrents i download with this client like it does when i use the build-in torrent client with nzbget?

eliasgv · (This post was last modified: 06-05-2009 01:44 PM by eliasgv.)

Hi, i have installed the new firmware and i noticed that my torrents are all in "verifying" mode and there is no progress (not those that are seeding- these are still work ok). any idea what might be wrong?
Thanks

_____________________________
it turned to downloading stage so no need to reply. (although it took few hours...)

Squeek · 06-04-2009, 11:25 AM

As there are a few posts about unraring after download - can someone tell me what the current state of play is with triggering some sort of script on completion? either for this or transmission? What I'm ideally after is some way of simulating the 'move to another folder after completion' that uTorrent has - I'd like to either give the files a different extension (like the utorrent !ut suffix) or download them into a hidden folder, and then have them renamed or moved when complete - so they only appear in gaya when they're ready to watch. I figured a 'moving' script would be the easiest way of changing this, but then would you need to stop, and then subsequently reverify the torrent?

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	bittorrent settings	jeroen342	1	333	05-05-2013 09:16 AM Last Post: chris57
	a300 will not connect to bittorrent ui	donal1682	4	1,246	09-17-2012 08:18 PM Last Post: miuivaniui
	Disable BitTorrent (Do not start it on restart)	hornedratty	4	1,202	06-21-2012 08:57 PM Last Post: hornedratty
	NZBget: Old recurring problem, but still no fast solution?: Error 403 Forbidden	Cherek	5	2,061	12-29-2011 05:28 PM Last Post: Cherek
	Where is bittorrent on A210	Albie999	4	2,136	07-08-2011 09:39 PM Last Post: chris57
	NMT BitTorrent and scheduling	simonz	8	3,954	05-21-2011 07:30 AM Last Post: Rusakov2@Netscape.net
	BTPD 0.15 - C200 - Lightweight and Fast Bittorrent	vaidyasr	12	6,803	05-09-2011 10:42 AM Last Post: vaidyasr
	Having issues with bittorrent.	philipmediaplayer	0	921	03-19-2011 02:31 PM Last Post: philipmediaplayer
	BitTorrent on C200	BlooDz	1	1,804	11-20-2010 01:47 PM Last Post: deadlyhifi
	Basic principles of optimizing a bittorrent client	Media	0	1,444	08-16-2010 11:43 AM Last Post: Media