MediatankController 1.2 for iPhone - browse and control your NMT from your phone

[qetuR]

(05-09-2012 09:54 PM)AntiCat Wrote:  I fixed the "Long loading" and the empty "Remote-Buttons" issue within the iPhone theme.
The iPad should also be fixed but is untested.

To install the fix just download http://www.bugfree.ch/data/webui.zip and replace the contents of ftp://[mediatank]/Apps/MediatankController/webui/ with the files from the zip.

The changes take only effect if you clear the "WebCache" of the iPhone/iPad.
1. Open the Settings - App
2. Chose Safari
3. Press Extended (Button at the very bottom)
4. Press Website-Data
5. Delete the data from your NMT.
6. Enjoy fast loading (the first time the screen is flickering/reloading three times, thats normal)

THANKS!

[telum]

(06-28-2012 07:59 PM)qetuR Wrote:  

(05-09-2012 09:54 PM)AntiCat Wrote:  I fixed the "Long loading" and the empty "Remote-Buttons" issue within the iPhone theme.
The iPad should also be fixed but is untested.

To install the fix just download ...
and replace the contents of ...
The changes take only effect if you clear the "WebCache" of the iPhone/iPad.
1. Open the Settings - App
2. Chose Safari
3. Press Extended (Button at the very bottom)
4. Press Website-Data
5. Delete the data from your NMT.
6. Enjoy fast loading (the first time the screen is flickering/reloading three times, thats normal)

THANKS!

This is unfortunately not working for me, now many html-errors seems to be present.

Should I delete the whole folder "webui" og simply overwrite the existing files? I think I tried both without success...

[ldegheest]

Everytime I save the settings, busybox26 is added to the busybox location. So the second time it looks like this:

Code:

/share/bin/busybox26busybox26

Also I can't don't get response from the busybox26.
It gives me a timeout.
I can use telnet from putty on my PC or from the iPad app "NMT Remote" without any problem.
It is installed on my HDD in "/share/bin/busybox26" with the telnet-installer.zip I found on the lundman wiki.


debug:

Code:

Checking if network share:
/opt/sybhttpd/localhost.drives/
sendCommand received
Timeout: No response from NMT within 15 seconds
Sending command to NMT:
[ -n "`ls --color=never 2>&1 | grep unrecognized`" ] && ls -l "/opt/sybhttpd/localhost.drives/" || ls --color=never -l "/opt/sybhttpd/localhost.drives/"
Timeout: No response from NMT within 15 seconds

[martking]

(08-22-2012 11:28 AM)telum Wrote:  

(06-28-2012 07:59 PM)qetuR Wrote:  

(05-09-2012 09:54 PM)AntiCat Wrote:  I fixed the "Long loading" and the empty "Remote-Buttons" issue within the iPhone theme.
The iPad should also be fixed but is untested.

To install the fix just download ...
and replace the contents of ...
The changes take only effect if you clear the "WebCache" of the iPhone/iPad.
1. Open the Settings - App
2. Chose Safari
3. Press Extended (Button at the very bottom)
4. Press Website-Data
5. Delete the data from your NMT.
6. Enjoy fast loading (the first time the screen is flickering/reloading three times, thats normal)

THANKS!

This is unfortunately not working for me, now many html-errors seems to be present.

Should I delete the whole folder "webui" og simply overwrite the existing files? I think I tried both without success...

Hi, I had the same problems as telum, when tried from my iPad, but got fixed!
- First of all, I have replaced the files one by one NOT using FTP but using the normal windows file system (I do not the reason but copying via FTP will put some rubbish into the files)
- Second is that when the copy the files is done, I have rebooted the popcorn and have cleaned the cache on the iPad.

Now I have the icons on all the buttons and it works perfect!

martking

[jedebe]

Dear Niels,
does your app work on an ipad too?
Is the shuffle functionality available or can you add this?

Thanks
JOhan