Threaded Mode | Linear Mode

gabric098 · 05-30-2009, 09:32 AM

Hi,
I just downloaded and installed NCS from http://www.nmtinstaller.com/, I installed Mono Framework 2.4 but the application is very unstable and buggy. I can't install anything on my nmt (egreat M32B) because when I click on install button the NCS application freeze and I have to kill it.
Someone have experience with osx and could give me some help? (Please don't tell my I have to set up a Windows box to use NCS confused

)

Thanks,
G.

Asha · 05-30-2009, 09:42 AM

Hi gabric098!!
I have a PPC OSX and it works with the last version of the comunity installer, tru the 2.1.5.

Enjoy!!

Big Grin

Ger Teunis · (This post was last modified: 05-30-2009 10:41 AM by Ger Teunis.)

CSI on Mono (thus linux and osx) may work but is sub-par in comparison to Microsoft .NET
I've done a great deal of bypassing Mono bugs to get it at least working for most people.
Application installation should work okay, theme upload seems to fail on OSX (can anyone confirm!?).

At least make sure you use the latest Mono 2.4 and the latest CSI, continuous improvements are made on CSI and Mono side.

gabric098 · 05-31-2009, 12:31 PM

Thanks for your replies. I'm currently using last mono release 2.4_7 and last CSI version on an intel imac but, when I choose an application to install and press next CSI freeze and nothing is installed on NMT. Imac is currently wireless connected to my home network, can this be a problem?

Bye,
G.

(05-30-2009 10:41 AM)Ger Teunis Wrote: CSI on Mono (thus linux and osx) may work but is sub-par in comparison to Microsoft .NET
I've done a great deal of bypassing Mono bugs to get it at least working for most people.
Application installation should work okay, theme upload seems to fail on OSX (can anyone confirm!?).

At least make sure you use the latest Mono 2.4 and the latest CSI, continuous improvements are made on CSI and Mono side.

lundman · 05-31-2009, 02:03 PM

I have Intel mac, and use latest. It is worth noting that when you click download, and it goes to download (Windows version show download progression bar) the OsX client with do "spinny thing of death" for about 10-15s, during the entire download, and then come back. If your net is slower, it will do the spinny thing for longer.

HDX1000_NL · 05-31-2009, 02:15 PM

Latest OSX, Latest CSI, Latest Mono.

It works fine! (Also the themes)

The GUI bares to be improved, but everything chosen installs fine.

Kind Regards, HDX1000_NL

gabric098 · 05-31-2009, 02:40 PM

Same configuration but doesn't work for me.
Your mac is wire or wireless connected to netwrok?

G.

(05-31-2009 02:15 PM)HDX1000_NL Wrote: Latest OSX, Latest CSI, Latest Mono.

It works fine! (Also the themes)

The GUI bares to be improved, but everything chosen installs fine.

HDX1000_NL · 05-31-2009, 05:34 PM

(05-31-2009 02:40 PM)gabric098 Wrote: Same configuration but doesn't work for me.
Your mac is wire or wireless connected to netwrok?

G.

Wired, Wireless is not my thing, call me old-fashioned Smile

Ger Teunis · 05-31-2009, 05:37 PM

(05-31-2009 02:40 PM)gabric098 Wrote: Same configuration but doesn't work for me.
Your mac is wire or wireless connected to netwrok?

Should make a difference, in perspective of CSI (and Mono) there is just an 'computer with an ip address' and I just send tcp packages that way and wait for an response. I do not think it is a wireless issue, but I am just guessing here.

lundman · 06-01-2009, 06:40 AM

Could be a firewall issue mind you... but usually it lets you do connections out though.

gabric098 · 06-02-2009, 12:50 PM

Today I reinstalled mono 2.4 and latest version of CSI and now it's working. I don't know what was the problem in the last days.
Anyway, thanks for your replies.

G.

BlackPopcorn · 06-06-2009, 10:43 PM

I was installing CSI but it asked to install first mono. Then I installed mono and now I run CSI installer. It says "Application can not be run from read-only volumes". Then I copied it to some folder and tried again. After that some mono icon is in the dock but it is saying "not responding". What now?

**dc11ab** · 06-07-2009, 10:54 AM

(06-06-2009 10:43 PM)BlackPopcorn Wrote: I was installing CSI but it asked to install first mono. Then I installed mono and now I run CSI installer. It says "Application can not be run from read-only volumes". Then I copied it to some folder and tried again. After that some mono icon is in the dock but it is saying "not responding". What now?

I think you should remove what you have installed now and re-install.

But first, create a new folder (call it Apps or whatever) and then drag the CSI installation there - not to your default Applications folder.

Let us know how it goes.

BlackPopcorn · 06-07-2009, 04:46 PM

I couldn't find mono uninstaller.

**dc11ab** · 06-07-2009, 04:51 PM

Uh... you are on a Mac!? Just drag and drop to Trashbin. Or use AppZapper (http://www.appzapper.com/) if you feel uneasy about it.

Meanwhile, do the CSI installation to your own dir and see what gives.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	[CSI] Community Software Installer 2.7.2 UPDATED DEC 28th	Ger Teunis	580	262,273	04-10-2013 12:42 PM Last Post: timwest73
	NMT remote iPhone native app.	racermonoid	390	125,763	03-06-2013 08:01 PM Last Post: mindnever
	Music Browser for NMT - Updated August, 2nd, 2011	gkreidl	14	8,018	01-19-2013 04:07 PM Last Post: winfried_laane
	MediatankController 1.2 for iPhone - browse and control your NMT from your phone	Niels Leenheer	424	273,211	11-27-2012 03:28 PM Last Post: jedebe
	[Apps] Bierdopje 4 NMT PHP script	SilverViper	4	1,315	11-26-2012 04:57 PM Last Post: Djiest
	MediatankController 1.0 for Adobe AIR - browse and control your NMT from your PC	Niels Leenheer	232	165,799	05-13-2012 10:48 PM Last Post: robertazimmerman
	fuppes 0.629 for NMT - dlna, upnp media server [UPDATED: 31-May-2009]	Mr Segfault	53	45,197	10-12-2011 01:04 AM Last Post: spud
	Avidemux on NMT	Cholsonic	0	1,218	09-26-2011 12:23 PM Last Post: Cholsonic
	A ssh client for NMT A-100	Oleg	0	2,106	05-24-2011 05:54 PM Last Post: Oleg
	default nmt theme and more rows	bephi_perez	0	1,884	04-30-2011 07:56 PM Last Post: bephi_perez