[HTML SKIN] ÆON Movie Wall YAMJ *UPDATE* May 9, 2010 - Clean Up #4

[accident]

if you get into having multiple versions of shows you'll see how the date in ()'s left of s##e## is important if thetvdb.com has a date in the search

[Penge58]

(01-25-2010 07:44 AM)gonzalu Wrote:  Try some of my videos and see if they help :-)

Yes thanks....but were are they ???? :-)

[ejp]

(01-25-2010 07:55 AM)asgard1 Wrote:  I have provide my own fanart and posters for those movies in question and they are labeled correctly but it dosen't seem to be pick them up when i regenerate. I thought it might be because the posters are not the correct sizing, but any help/ideas would be great.

For the movies that don't have poster (or fanart) come up, delete their respective XML and JPG files from the output jukebox folder, then try regenerating.

If it still doesn't come up after that, then I don't think it's a skin issue anymore. YAMJ somehow isn't picking up your artwork.

[Penge58]

(01-25-2010 07:58 AM)Penge58 Wrote:  Yes thanks....but were are they ???? :-)

Found them on youtube :-)

[asgard1]

(01-25-2010 08:15 AM)ejp Wrote:  For the movies that don't have poster (or fanart) come up, delete their respective XML and JPG files from the output jukebox folder, then try regenerating.

If it still doesn't come up after that, then I don't think it's a skin issue anymore. YAMJ somehow isn't picking up your artwork.

The fanart comes up no trouble its just the actual poster, could it be the actual size of the poster?

[accident]

How to fix Sabish LowList mod for tvs with overscan:

1: Install the Sabish lowlist mod.
2: Make the following changes:

In lowlist.xsl:

Change #1:

On Line 15 find:

Code:

<tr><td height="377" width="1187" valign="top">

Reduce the height (remember how much you lowered it by, 30 worked well for me making mine height="347")

Change #2:

On Line 108 find:

Code:

<table border="0" cellspacing="0" cellpadding="0" width="845" height="300">&lt;!--832--&gt;

reduce the height by the same amount you lowered it for change #1, again mine was 30 so mine is height="270".

In exportdetails_item_popcorn.css:

Change #1:
on line 229 find:

Code:

#tvbgmovr { visibility: visible; position: absolute; top: 367px; left: 1187px;}

reduce the top: number by the same amount you used in change #1, 30 in my case making it 337px

3: If your using "BOX", adjust the box location following these instructions

4: delete all the html files from the jukebox or set html overwrite to true and run yamj.

Enjoy.

[gonzalu]

(01-25-2010 08:57 AM)asgard1 Wrote:  The fanart comes up no trouble its just the actual poster, could it be the actual size of the poster?

--Delete all details from the jukebox folder for the movies/shows in question

--clear cache on NMT

--reboot nmt

--While nmt reboots, regen YAMJ jukebox.

try that.

---

(01-25-2010 07:58 AM)Penge58 Wrote:  Yes thanks....but were are they ???? :-)

In my signature, or from the first post :-)

[Kasimodo]

Hello,
I don't understand... all html files seems to be ok... but when I click Enter or Play so for playing a movie... nothing happens (for all movies). After a second click, your app closes itself and back to the C200 folder menu.
What happens?
For information... index.html is in the "apps" folder.

[cosmogate]

anyone could help me with this?

i just put In the moviejukebox.properties file, enable and set the following parameters:
appletrailers.resolution=1080p/720p/480p/640
appletrailers.download=false/true

but it wont download anything please help!

please help i would like to see trailers at yamj

thx all

[gonzalu]

(01-25-2010 11:04 AM)cosmogate Wrote:  anyone could help me with this?

i just put In the moviejukebox.properties file, enable and set the following parameters:
appletrailers.resolution=1080p/720p/480p/640
appletrailers.download=false/true

but it wont download anything please help!

please help i would like to see trailers at yamj

thx all

Is that written as is? If so, you must PICK ONE option per item.

appletrailers.resolution=1080p
appletrailers.download=true

or

appletrailers.resolution=720p
appletrailers.download=false

etc. etc.

[accident]

(01-25-2010 11:04 AM)cosmogate Wrote:  i just put In the moviejukebox.properties file, enable and set the following parameters:
appletrailers.resolution=1080p/720p/480p/640
appletrailers.download=false/true

This has nothing to do with aeon, it really should be its own thread.. those settings are wrong..

appletrailers.resolution=1080p
appletrailers.download=true

This will get the highest resolution video it can find and download it.

Make sure the moviejukebox.properties file is located in the yamj root folder (the one with categories.xml in it).. Also if you had it set for streaming in the past your going to need to reset the whole jukebox for it to start downloading trailers for you

[gonzalu]

.

UPDATE

Added new video to my playlist.

Configuring YAMJ in standalone mode, no media streamer, multiple Library locations.

http://www.youtube.com/my_playlists

[Grifone1893]

(01-25-2010 09:20 AM)accident Wrote:  How to fix Sabish LowList mod for tvs with overscan:

1: Install the Sabish lowlist mod.
2: Make the following changes:

In lowlist.xsl:

Change #1:

On Line 15 find:

Code:

<tr><td height="377" width="1187" valign="top">

Reduce the height (remember how much you lowered it by, 30 worked well for me making mine height="347")

Change #2:

On Line 108 find:

Code:

<table border="0" cellspacing="0" cellpadding="0" width="845" height="300">&lt;!--832--&gt;

reduce the height by the same amount you lowered it for change #1, again mine was 30 so mine is height="270".

In exportdetails_item_popcorn.css:

Change #1:
on line 229 find:

Code:

#tvbgmovr { visibility: visible; position: absolute; top: 367px; left: 1187px;}

reduce the top: number by the same amount you used in change #1, 30 in my case making it 337px

3: delete all the html files from the jukebox or set html overwrite to true and run yamj.

Enjoy.

Wow great work!
I don't have overscan problem but I'd need to solve the issue about the skin break when you have a movie title "too" long.

Have you tried to fix it?
Thanks

[accident]

(01-25-2010 11:50 AM)Grifone1893 Wrote:  Wow great work!
I don't have overscan problem but I'd need to solve the issue about the skin break when you have a movie title "too" long.

Have you tried to fix it?
Thanks

I was thinking of just making it a smaller font since I seem to have more that break than don't. I also have some of the bar turned off so I could make the name section wider.

In exportdetails_item_popcorn.css this is the settings for the font size it starts near line 85:

Code:

.tvtt {
    color: #ececec;
    font-weight: normal;
    font-size: 20pt;
}

I was also playing with the idea that if its a multipart name like Lord of the Rings: Fellowship of the rings, break it into 2 lines with a slightly smaller Lord of the Rings and a really small fellowship of the rings under it.

---

Actually on closer inspection, the width for rating seems really big to me..

in lowlist.xsl:

Code:

<td valign="center" height="50" width="280" background="pictures/dim/custom_header.png"><xsl:attribute name="class">rating</xsl:attribute>

I would play with that width="280" a little and see how much lower youcould drop it.. if things look weird, most of the items in that area of the code have widths for the various across the top line, lowering some others should tighten up the line and whatever is left the title will have to use.

[Grifone1893]

(01-25-2010 11:58 AM)accident Wrote:  I was thinking of just making it a smaller font since I seem to have more that break than don't. I also have some of the bar turned off so I could make the name section wider.

In exportdetails_item_popcorn.css this is the settings for the font size it starts near line 85:

Code:

.tvtt {
    color: #ececec;
    font-weight: normal;
    font-size: 20pt;
}

I was also playing with the idea that if its a multipart name like Lord of the Rings: Fellowship of the rings, break it into 2 lines with a slightly smaller Lord of the Rings and a really small fellowship of the rings under it.

I'm in your situation (some of the bar turned off : no studio flag, I dont't like it in that position) so, for me, the best workaround should be to make name section wider.
As you say, reducing font dimension is another option, but I think is not the best. I like this mod because of the new positioned movie title.
This make the title itself more clear and reduce the font dimension go in the opposite direction, expecially for "short" title.