[HTML SKIN] ÆON Movie Wall YAMJ *UPDATE* May 9, 2010 - Clean Up #4

[indiejones]

I've tried all types of colours but as I've got 2 girls who use the popcorn hour all the time they chose "Pink"

here you go if you want this blue

[Pacman33]

(04-28-2010 01:24 AM)indiejones Wrote:  I've tried all types of colours but as I've got 2 girls who use the popcorn hour all the time they chose "Pink"

here you go if you want this blue

Wow, I had just opened up photoshop and something made me check the thread 1st. Once again thanks and I have a 6yr old girl too, so I gotta keep the pink a secret.

[Pacman33]

Thanks to this thread and the wiki, I have YAMJ/AEON up and running perfectly. The only problem I can't seem to get past is the fanart for movie boxsets. I can get the master to show, instead it defaults to the same background as the movie wall. Here is how I have the .jpgs labeled. BTW, the set covers work fine.

Set_Mission Impossible Set_1.fanart
Set_National Treasure_1.fanart
Set_Star Wars Collection_1.fanart
Set_Fast and Furious Series_1.fanart
Set_Bratz Movies_1.fanart

[lemonstar]

Hi brothers,

after reading hundreds of threads,
I could figure out how to install this nice and beautiful YAMJ skin

I got the "Aio_Sabish_Mod_eng" package installed,
however didn't have a clue to get the 1080p, Audio source index and such at the bottom of the page (pls see attached img.)
my file names are:
'HD drive':/Iron Man 2008 Blu-ray 1080p AVC TrueHD/Iron Man 2008 Blu-ray 1080p AVC TrueHD.iso
'HD drive':/TROY 2004 Bluray/TROY 2004 Bluray.iso

Is it because of my file name mistake or I have to change some settings from the skin properties.
Please kindly advise. Very much appreciated.

[AbMagFab]

(04-27-2010 11:14 PM)AbMagFab Wrote:  Is there any way to turn of "play" from the wall view? For ISOs, on the A200, hitting "play" from the wall (or list) view causes the A200 to hang and need to be rebooted. Otherwise, as long as you don't use the pop-up skin, the other AEON wall views work fine.

Thanks!

Anyone? This is a pretty severe issue, and makes the AEON skin useless on the A200, since it will always hang on an ISO.

[lemonstar]

Thread #7940

anyone that could give me a hand please?

I have tried MediaInfo version 7.20, 7.25 and the latest 7.31

all the same results, not solved~

[coiken]

Hi,

I noticed that for my tv-series covers I don't get the real cover but a disformed screenshot of the 1st episode of my series. Anyone knows how to fix this?

Cheers,

Coiken

[indiejones]

(04-30-2010 08:46 AM)lemonstar Wrote:  Thread #7940

anyone that could give me a hand please?

I have tried MediaInfo version 7.20, 7.25 and the latest 7.31

all the same results, not solved~

How are your films named?
ie: Iron.Man.2008.1080p.BluRay.DTS.x264

also on this Mod why would you need to have the VideoSource active when your box cover already shows what media it is also I'm sure I read somewhere here that the StudioField caused some problems

These are my settings in my LowList try them to see if it solves your problem

Code:

<xsl:variable name="ShowVideoSource">false</xsl:variable>
<xsl:variable name="ShowVideoCodec">true</xsl:variable>
<xsl:variable name="ShowAudioCodec">true</xsl:variable>
<xsl:variable name="ShowSubtitles">true</xsl:variable>
<xsl:variable name="ShowContainer">true</xsl:variable>
<xsl:variable name="ShowVideoOutput">true</xsl:variable>
<xsl:variable name="ShowFrameRate">true</xsl:variable>
<xsl:variable name="ShowAspectRatio">true</xsl:variable>
<xsl:variable name="ShowStudioField">false</xsl:variable>

[j0k3r]

re @ all,

since the latest yamj updates, my time doesnt show me correct on my c-200. On my Pc Browser all is fine, bur on the nmt it says date : 23.4.1944 and wrong clock .

Thats my Idexhome.html

Code:

    <script>
    function initClock() {updateClock(); setInterval('updateClock();', 1000);}
    function updateClock() {
        var TimezoneOffset = +1;
        var localTime = new Date();
        var ms = localTime.getTime()+(TimezoneOffset*3600);
        var time =  new Date(ms);
        var hour = time.getHours();
        var minute = time.getMinutes();
        var second = time.getSeconds();
        var curTime = "" + ((hour >24) ? hour - 24 : hour);
        var suffix = "";
        if(hour>=12) {suffix = "";}
        if(hour==0) curTime = "12";
        curTime += ((minute < 10) ? ":0" : ":") + minute;
        document.getElementById('time').firstChild.nodeValue = curTime;
        document.getElementById('suffix').firstChild.nodeValue = suffix;
        document.getElementById('date').firstChild.nodeValue = time.toDateString();
    }&lt;/script&gt;

[Sinyk]

Hi guys,

Sorry, if this has been answered before but I've not been able to find any mention...

I can't seem to get the episode-after-episde feature working in Aeon. In the skin-options.xsl file I made sure the following was right:

Code:

<!-- true: when you hit Enter on an episode, will play episode-after-episode starting from that episode. Play will only play that single episode. Note that RAR (Llink) and disk image (ISO, etc) files will only play as *single* episodes. -->
<!-- false: hitting Enter or Play on an episode will only play that episode. -->
<xsl:variable name="TVPlaylist">true</xsl:variable>

I also read the Readme at the start of this thread where it states:

Quote:4a. In the TV details view, press RIGHT/LEFT to see the adjacent episode. Press UP/DOWN to highlight the "Play All" link. Press PAGE UP/DOWN to see the next detail page.
4b. Pressing ENTER on an episode will play the playlist starting from that episode. Pressing PLAY will play only that episode.

I can't find the aforementioned "Play All" link anywhere on the screen.

I'm scratching my head here, folks. Any help would be appreciated. (And, yes, I've already deleted all the html and xml files from the Jukebox and rerun the script to see if that rectified the problem - no dice.)

[krazypoloc]

(04-30-2010 08:46 AM)lemonstar Wrote:  Thread #7940

anyone that could give me a hand please?

I have tried MediaInfo version 7.20, 7.25 and the latest 7.31

all the same results, not solved~

From dealing with iso's in the past I have found that mediainfo cli does not pull the info out of the movies properly if they are in an iso container.

You can try deleting all files in your jukebox relating to these titles and then re-running YAMJ but I doubt this will fix it.

[AbMagFab]

(04-30-2010 03:42 PM)krazypoloc Wrote:  From dealing with iso's in the past I have found that mediainfo cli does not pull the info out of the movies properly if they are in an iso container.

You can try deleting all files in your jukebox relating to these titles and then re-running YAMJ but I doubt this will fix it.

Correct. You need to manually put the information into the NFO file.

[krazypoloc]

(04-30-2010 03:50 PM)AbMagFab Wrote:  Correct. You need to manually put the information into the NFO file.

This is one of the reasons I use m2ts files for my library.....and adds to the aggrivation of the HD audio bug.....6 of one thing and a half dozen of the other.

[ejp]

Sorry I've been inactive for so long. I've had a few things going on and I felt I left the skin in good standing.

I've been more-or-less following the thread. I've answered a few questions below. If I haven't answered your question, I apologize -- don't take it personally, but it's probably a question I don't have an answer to, it's probably been answered numerous times, and/or it's not a question directly related to this skin.

I've been working on something, which I won't get into right now. As for the future of the skin and my position in this community, it's a large question mark. I'll probably release one more update for this skin and there's a high chance that may be the end of it, unfortunately. We'll see when the time comes.

---

(04-11-2010 01:21 PM)SFBG Wrote:  1 - i got this installed in a index that i've created only to see Tv Shows.
http://i50.photobucket.com/albums/f336/r...tv_dim.jpg
But i wondering if is possible to see ONE episode only, instead play all in a row??
Because sometimes the episode ends and plays a new one and i don't notice that..



2 - I used to turn On the NMT and it automaticly open the index.htm inside od the root of an USB external drive.
But nowadays it does not do that "autorun" anymore, i have allways have to select to open the USB drive.
Anyway the NMT opens the USB drive automaticly when i turn it on?

1 - You should be able to just press Play on the selected episode and it'll play that single episode only.
2 - That's an NMT question.

(04-20-2010 05:37 PM)indiejones Wrote:  Hi Ejp
I think I've asked this from you before but never really understood your answer... what I would like is to have is a custom header on the main Wall like this

http://img708.imageshack.us/img708/3199/customwall.jpg
I would like to have the header on every Wall (Movies,TV Shows,Categories,Top 250)

If possible could you point me to the code and files I need to edit, I also want to keep the Wall text highlighted like the example above
thanks

Look for this code in the index.xsl:

Code:

<table border="0" background="pictures/wall/filterbg1.png" cellspacing="0" cellpadding="0">

That entire table contains the FilterBar. If you know HTML (and a little bit of NMT HTML coding), you can achieve what you want.

(04-27-2010 11:14 PM)AbMagFab Wrote:  Is there any way to turn of "play" from the wall view? For ISOs, on the A200, hitting "play" from the wall (or list) view causes the A200 to hang and need to be rebooted. Otherwise, as long as you don't use the pop-up skin, the other AEON wall views work fine.

Thanks!

Well, I suppose the simplest solution is to just not press "Play". But if that's not an option, then look for this in the index.xsl:

Code:

<a>
    <xsl:attribute name="href"></xsl:attribute>
    <xsl:attribute name="tvid">#</xsl:attribute>
    <xsl:attribute name="id">play</xsl:attribute>
    <xsl:attribute name="vod">playlist</xsl:attribute>
</a>

You can either remove that entire section of code, or remove the word "play" or even remove just the entire "play" line. That will make the "Play" button inoperable.

[Quad4]

(04-30-2010 12:54 PM)j0k3r Wrote:  re @ all,

since the latest yamj updates, my time doesnt show me correct on my c-200. On my Pc Browser all is fine, bur on the nmt it says date : 23.4.1944 and wrong clock .

Hi , this is a bug in c200

In indexhome when you have c200

Delete This !

Code:

function initClock() {updateClock(); setInterval('updateClock();', 1000);}
    function updateClock() {
        var TimezoneOffset = +1;
        var localTime = new Date();
        var ms = localTime.getTime()+(TimezoneOffset*3600);
        var time =  new Date(ms);
        var hour = time.getHours();
        var minute = time.getMinutes();
        var second = time.getSeconds();
        var curTime = "" + ((hour >24) ? hour - 24 : hour);
        var suffix = "";
        if(hour>=12) {suffix = "";}
        if(hour==0) curTime = "12";
        curTime += ((minute < 10) ? ":0" : ":") + minute;
        document.getElementById('time').firstChild.nodeValue = curTime;
        document.getElementById('suffix').firstChild.nodeValue = suffix;
        document.getElementById('date').firstChild.nodeValue = time.toDateString();

And make This code and the time an date works

Code:

function initClock() {updateClock(); setInterval('updateClock();', 1000);}
    function updateClock() {
        var localTime = new Date();
        var TimezoneOffset = +1;
        //var ms = localTime.getTime()+(TimezoneOffset*3600);
        //var time = new Date(ms);
        var hour = localTime.getHours() + TimezoneOffset;
        var minute = localTime.getMinutes();
        var second = localTime.getSeconds();
        var curTime = "" + ((hour > 24) ? hour - 24 : hour);
        if(hour==24) curTime = "00";
        curTime += ((minute < 10) ? ":0" : ":") + minute;
        curTime += ((second < 10) ? ":0" : ":") + second;
        document.getElementById('time').firstChild.nodeValue = curTime;
        document.getElementById('date').firstChild.nodeValue = localTime.toDateString();