No Video output after loading

[beanyman1000]

Hi Guys, first time on forum, I have had an A110 for 18 months now, and I have problem. when switching NMT on I says loading on screen then it says No signal. I have reset, and checked the obvious things, but to no avail. Is there something that can be done by me or is it a fault that needs a repairer?

[spawn]

After the loading screen are gone, and you have no signal, then

press the "TV-mode" button on the remote once, wait 3-4 sec and then
press the "7" button on the remote once, wait again and the picture should appear

if that does not help, then try the same but this time press "0" on the remote - that is

press the "TV-mode" button on the remote once, wait 3-4 sec and then
press the "0" button on the remote once, wait again and the picture should appear

If you get a picture, then goto settings and set video output to a supported output like HDMI 720p60 and save it.
If you do not get a picture, then try connecting with a composite cable, and if you get a picture with this, then goto settings and set video output to HDMI 720p60 and save

[beanyman1000]

Thanks very much Spawn, that has sorted the problem out.
It's very easy when you know how eh?
I have now updated the firmware and software and it works great.

[spawn]

Everything is easy, when you know how

Glad it got sorted