Index.htm on usb....for startup

[hispanico]

I have a PopCorn A-110 and some others network share and also an A-200.
I want use it without internal drive. So i ask if it possible use a USB Key (8gb), where i can put index.htm so when i power-up the A-110 automatically load form usb the index.htm....
I follow also this link but is dead:

http://www.networkedmediatank.com/wiki/i..._USB_stick

Thank
Hispanico

[DaMan05]

that link probably isnt dead. you just copy pasted the shortened link that is not the complete link. go back to where you got that link and click on it, dont copy paste it.

also, im pretty sure there is a way to auto-mount the USB stick at startup, but having that as the only media source would also do the trick.

[hispanico]

(06-19-2010 11:06 PM)DaMan05 Wrote:  that link probably isnt dead. you just copy pasted the shortened link that is not the complete link. go back to where you got that link and click on it, dont copy paste it.

also, im pretty sure there is a way to auto-mount the USB stick at startup, but having that as the only media source would also do the trick.

This is the link:

Code:

http://www.networkedmediatank.com/wiki/index.php/NMT_Apps:alternative_installation#Installing_NMT_Apps_on_a_USB_stick

...and regarding auto-mount USB stick at startup you have some links or istructions fot it ??

Thank
Hispanico

[chris57]

Do not just assume that what can be done on the A110 can also be done on the A200, and vice versa. That's why we try to distinguish the WIKI pages if they are only for the one series.

http://www.networkedmediatank.com/wiki/i.../Index.htm
http://www.networkedmediatank.com/showth...?tid=13624

You cannot install the NMT Apps to USB on the 100 series without a lot of advanced knowledge:-
http://www.networkedmediatank.com/wiki/i..._USB_stick

On the 200 series it's a piece of cake as you can do it via the NMT Setup Wizard.

The tools for automounting more than one share work well on the 100 series. On the 200 series you don't need them as UMC and the new UI don't need them to play from their databases.

---

Deleted the link you had as it was wrong and created a blank page/redirect.

[hispanico]

I read the wiki but :

Quote:Create and format an ext3 partition on a USB hard disk drive or you can just use a pre-formmated vfat USB flash drive

..i don't undestand

i have usb hd and i must format in ext3 (which program i can use ?) ..but after it if usb hd is formatted in ext3 it can be see form windows ?

Thank
Hispanico