Twitter
Facebook
NMT Wiki
Search
Member List
HelpFirmware: 
A-400 [13 May 2013] | C-300 [30 Nov. 2012] | A-300 [30 Nov. 2012] | C-200 [21 Jan. 2013] | A-200/A-210 [10 Aug. 2012]
User(s) browsing this thread: 1 Guest(s)
 External USB HDD not recognized
|
|
02-14-2011, 12:19 AM
 Post: #1 |
|||
|
|||
|
External USB HDD not recognized
I tried to copy large (>8GB) files to my C-200 using WiFi connection, but it takes a few hours for each (~1.5-2MB/s transfer rate). Then I tried to connect an external NTFS formatted SATA USB HDD (2.5" Samsung 320GB) but it was not recognized. My NMT was practically freezed until I disconnected the HDD. When doing this the correct volume label of my HDD appeared for a second in the upper right corner of the TV screen. I have a built in 2.5" 650GB SATA Samsung HDD inside as well. There were only a few files on the external disk. Neither USB port worked. How can I fix this problem?
|
|||
|
![[+]](images/collapse_collapsed.gif)
|
02-14-2011, 12:20 AM
Post: #2 |
|||
|
|||
|
RE: External USB HDD not recognized
Does the external drive have any sort of strange partitions on the front of it like a recovery partition?
|
|||
|
|
|
02-14-2011, 05:38 AM
Post: #3 |
|||
|
|||
|
RE: External USB HDD not recognized
Does it require 2 x USB to power the USB HDD, or was it attached via a powered USB hub or the enclosure externally powered?
A400: SSD+SD Card(Apps), HDMI A300: USB(Apps), HDMI C200: USB(Apps), BD SH-B083L(SB01), HDMI CAT6 Wired Network: TV TX-P42G20, HP ProCurve 1400-8G, Netgear GS-608/605, Synology CS407 |
|||
|
|
|
02-14-2011, 02:50 PM
(This post was last modified: 02-14-2011 02:56 PM by gabbbor.)
Post: #4 |
|||
|
|||
RE: External USB HDD not recognized
(02-14-2011 12:20 AM)halfelite Wrote: Does the external drive have any sort of strange partitions on the front of it like a recovery partition? There is a single NTFS partition nothing else. When I previously formatted the HDD to FAT32 there was a small additional partition. The USB port also did not work when the HDD was formatted as FAT32. (02-14-2011 05:38 AM)chris57 Wrote: Does it require 2 x USB to power the USB HDD, or was it attached via a powered USB hub or the enclosure externally powered? The HDD works properly with other computers using only a single USB port. Is the current limit lower than 500mA on NMT USB ports? When I get home I try to use 2 USB ports to power my HDD. |
|||
|
|
|
02-14-2011, 07:20 PM
Post: #5 |
|||
|
|||
| RE: External USB HDD not recognized | |||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread: | Author | Replies: | Views: | Last Post | |
| Looking for 4tb external | iamloco724@aol.com | 5 | 378 |
04-27-2013 07:54 AM Last Post: Willem53 |
|
| A-400 external drives USB or ESATA? | ukchevy | 17 | 2,716 |
10-28-2012 12:39 PM Last Post: ukchevy |
|
| Popcorn Hour WN-150 USB WiFi Adapter Purchase (UK)? | chrisk | 4 | 1,891 |
04-14-2012 07:54 PM Last Post: chris57 |
|
| USB case | h2ofun | 1 | 645 |
04-06-2012 04:09 PM Last Post: Temujin |
|
| A300 USB w 4 x HDD only connects 3! | maikone | 3 | 1,036 |
03-02-2012 10:55 PM Last Post: marsu30 |
|
| UID changed on ext3 USB HDD | januszx | 2 | 1,044 |
02-19-2012 03:11 PM Last Post: januszx |
|
| any NMT supports USB audio? | leptonhead | 5 | 1,542 |
01-17-2012 10:16 AM Last Post: Bytec |
|
| help me find a 2TB usb drive for Black friday/cybermonday | spediegunz | 5 | 2,571 |
12-13-2011 11:53 AM Last Post: joahar |
|
| USB 3.0 | utomo | 10 | 2,721 |
06-01-2011 09:21 AM Last Post: chris57 |
|
| NMJ with external hard drive | Fernnado C | 1 | 1,342 |
04-10-2011 08:55 PM Last Post: dc11ab |
|