Sickbeard setup issue on A110 - no web page after install

[Damester24]

I installed local (ipkg), via CSI and then installed Sickbeard.
I click the suggested link at the end of the CSI install but I get a page cannot be displayed or firefox unable to connect.

The suggested link looks correct: pch-a110:8081 - also tried 192.168.1.50:8081 but nothing is found.

I checked the .daemonresult and I see no issues (but i'm no expert):
The last few lines are:
Cheetah-2.4.4/setup.cfg
./daemon.sh: line 120: /share/Apps/local/bin/python2.7: not found
Host name added to list
SickBeard.py is not running, Starting processes

Someone advised that provided the last line shown above is the last line then all should be ok.

I get the ipkg url ok: http://192.168.1.50:9999/local_web/index.php
But is shows no packages in the package list, should it?
What is wrong?
Please advise

[jhmiller]

ipkg does no long work, you need opkg. Uninstall ipkg(local) then close CSI, then before running CSI you need to delete the Vaidyasr_RepositoryInfo.xml from the CSI Repository folder then start csi again and install opkg(local)

You should be ok now.

[Damester24]

Awesome, thanks jhmiller,

I ran CSI removed local, closed it an deleted that file.
Ran CSI again and it said:

---------------------------
Repository update
---------------------------
Can't connect to repository server Vaidyasr.

Make sure your internet connection is up, perhaps Vaidyasr's server is down.
---------------------------
OK
---------------------------

I've run out of time to play with it, will have a closer look tomorrow
Or maybe you can advise in the meantime

Thans

[jhmiller]

just checked with my csi and CSI works fine.

[Damester24]

I just downloaded the latest verion of CSI and tried running it, it tells me every repository is unavaiable.
I'm questioning my broadband connection asthey did make changes recently. Although I can browse internet fine I'm seeing other issue. I will investiage and let you know how I get on.

Thanks for your input

[Damester24]

So I found some trojans on my system last night which seemed to mess up CSI, as soon as I removed them, I was able to download all CSI repositries and install Opkg. Then sickbeard and all is working correctly.

Now to find out how to configure it for NZBget and NZB.org's

Thanks again for pointing me in the right direction

[Damester24]

Does sickbeard work? on the A-300.

I installed Local 0.1.8-nmt2 (OPKQ version) and the Sickbeard but cannot see webUI
:8081

[jhmiller]

As far as i know (dont have 1) it should work, when setting up csi with the C300, tell CSI that its a C200 and you should be good to go.

If you have done that, have a look for the .daemonresult in the SB folder and look for any errors.

[Damester24]

Ok it worked eventually.

If I looked at the "local" install from a browser: http://192.168.1.60:9999/local_web/ it was not showing anything installed.
After stopping sickbeard, local showed packages. I then re-Installed SB again and it worked.

Not sure what combination I used to stop/start SB and local but this and re-installing eventually got it to work.
It was quote stubborn though.